Water hardness in Yakima County, WA
Water in Yakima County is hard, with a median of 178 mg/L (10.4 grains per gallon) across 68 monitoring sites.
Yakima County water at a glance
- HardnessHard (178 mg/L, 10.4 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 178 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 10.4 gpg (10 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Yakima County
Prefilled with Yakima County's measured local hardness of 178 mg/L (10.4 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Yakima County on the Washington map
Cities and communities in Yakima County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Yakima | 47 | Soft | 3 sites within 10 miles |
| Sunnyside | 207 | Very hard | 54 sites within 10 miles |
| Grandview | 103 | Moderately hard | 6 sites within 10 miles |
| Toppenish | 214 | Very hard | 50 sites within 10 miles |
| Selah | 47 | Soft | 3 sites within 10 miles |
| Terrace Heights (CDP) | 47 | Soft | 6 sites within 10 miles |
| Union Gap | 47 | Soft | 5 sites within 10 miles |
| Moxee | 47 | Soft | 6 sites within 10 miles |
| Wapato | 51 | Soft | 8 sites within 10 miles |
| Granger | 205 | Very hard | 55 sites within 10 miles |
| Ahtanum (CDP) | 47 | Soft | 3 sites within 10 miles |
| Zillah | 207 | Very hard | 54 sites within 10 miles |
| Gleed (CDP) | 178 | Hard | county median |
| Mabton | 162 | Hard | 5 sites within 10 miles |
| Tieton | 178 | Hard | county median |
| Naches | 178 | Hard | county median |
| Buena (CDP) | 51 | Soft | 10 sites within 10 miles |
| Summitview (CDP) | 178 | Hard | county median |
| White Swan (CDP) | 118 | Moderately hard | 5 sites within 10 miles |
| Harrah | 140 | Hard | 3 sites within 10 miles |
| Cowiche (CDP) | 178 | Hard | county median |
| Eschbach (CDP) | 178 | Hard | county median |
| Tampico (CDP) | 178 | Hard | county median |
| Outlook (CDP) | 209 | Very hard | 53 sites within 10 miles |
| Parker (CDP) | 98 | Moderately hard | 7 sites within 10 miles |
| Nile (CDP) | 178 | Hard | county median |
| Cliffdell (CDP) | 178 | Hard | county median |
| Donald (CDP) | 51 | Soft | 10 sites within 10 miles |
Water quality in Yakima County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Yakima | City of Yakima Water Division | None detected | 0 lead · 0 unknown | None |
| Sunnyside | City of Sunnyside | None detected | 0 lead · 2,138 unknown | None |
| Grandview | City of Grandview | None detected | 0 lead · 2,236 unknown | 1 |
| Toppenish | Toppenish Water Department | None detected | 0 lead · 2,309 unknown | None |
| Selah | City of Selah | None detected | Not reported | 1 |
| Union Gap | Union Gap Water | None detected | 10 lead · 1,641 unknown | None |
| Moxee | Moxee Water Department | None detected | 0 lead · 1 unknown | None |
| Wapato | Wapato Waterworks | None detected | 0 lead · 143 unknown | None |
| Granger | Granger Water Department | None detected | 0 lead · 0 unknown | None |
| Zillah | City of Zillah | Not tested | 0 lead · 0 unknown | 1 |
| Mabton | City of Mabton | Not tested | 0 lead · 281 unknown | None |
| Tieton | City of Tieton Water Dept | Not tested | 0 lead · 256 unknown | None |
| Naches | Town of Naches | None detected | Not reported | None |
| Harrah | Harrah Water System | Not tested | 0 lead · 0 unknown | None |
Neighboring counties
- Klickitat County63 mg/L
- Kittitas County44 mg/L
- Benton County67 mg/L
- Skamania County62 mg/L
- Lewis County15 mg/L
- Pierce County51 mg/L
Washington
The statewide median is 74 mg/L (moderately hard) from 890 sites.
Washington hardness map →Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.