Do you need a water softener?
Updated November 20, 2026 · Based on EPA and other public sources listed below · How we make our content
Short answer: you probably don't need a softener if your water is under about 7 grains per gallon (120 mg/L). Above that, scale on fixtures, appliances and water heaters becomes noticeable, and above 10.5 gpg (180 mg/L) softeners are common. Check your town's hardness first, then size the softener with the calculator below.
Step 1: find your water hardness
Look up your town on the water hardness map, read your utility's annual Consumer Confidence Report, or test a private well. Hardness is reported in milligrams per liter (mg/L) or grains per gallon (gpg); 1 gpg = 17.1 mg/L. Cities that publish their tap water hardness:
| City | Hardness | Class | Softener? |
|---|---|---|---|
| New York, NY | 31 mg/L · 1.8 gpg | Soft | Not needed |
| Los Angeles, CA | 170 mg/L · 9.9 gpg | Hard | Optional, common |
| Chicago, IL | 135 mg/L · 7.9 gpg | Hard | Optional, common |
| Phoenix, AZ | 218 mg/L · 12.7 gpg | Very hard | Commonly used |
| Philadelphia, PA | 125 mg/L · 7.3 gpg | Hard | Optional, common |
| San Antonio, TX | 300 mg/L · 17.5 gpg | Very hard | Commonly used |
| San Diego, CA | 276 mg/L · 16.1 gpg | Very hard | Commonly used |
| Dallas, TX | 138 mg/L · 8.1 gpg | Hard | Optional, common |
| Jacksonville, FL | 246 mg/L · 14.4 gpg | Very hard | Commonly used |
| Austin, TX | 93 mg/L · 5.4 gpg | Moderately hard | Usually not needed |
| Fort Worth, TX | 128 mg/L · 7.5 gpg | Hard | Optional, common |
| Columbus, OH | 115 mg/L · 6.7 gpg | Moderately hard | Usually not needed |
| Charlotte, NC | 39 mg/L · 2.3 gpg | Soft | Not needed |
| Indianapolis, IN | 292 mg/L · 17.1 gpg | Very hard | Commonly used |
| San Francisco, CA | 8 mg/L · 0.5 gpg | Soft | Not needed |
| Seattle, WA | 28 mg/L · 1.6 gpg | Soft | Not needed |
| Denver, CO | 105 mg/L · 6.1 gpg | Moderately hard | Usually not needed |
| Las Vegas, NV | 280 mg/L · 16.4 gpg | Very hard | Commonly used |
| Boston, MA | 16 mg/L · 0.9 gpg | Soft | Not needed |
| Detroit, MI | 116 mg/L · 6.8 gpg | Moderately hard | Usually not needed |
| Louisville/Jefferson County metro government, KY | 135 mg/L · 7.9 gpg | Hard | Optional, common |
| Milwaukee, WI | 138 mg/L · 8.1 gpg | Hard | Optional, common |
| Kansas City, MO | 100 mg/L · 5.8 gpg | Moderately hard | Usually not needed |
| Aurora, CO | 136 mg/L · 7.9 gpg | Hard | Optional, common |
| New Orleans, LA | 101 mg/L · 5.9 gpg | Moderately hard | Usually not needed |
| Cleveland, OH | 117 mg/L · 6.8 gpg | Moderately hard | Usually not needed |
| Henderson, NV | 304 mg/L · 17.8 gpg | Very hard | Commonly used |
| Lubbock, TX | 192 mg/L · 11.2 gpg | Very hard | Commonly used |
| Paradise, NV | 280 mg/L · 16.4 gpg | Very hard | Commonly used |
| Sioux Falls, SD | 250 mg/L · 14.6 gpg | Very hard | Commonly used |
| Amarillo, TX | 238 mg/L · 13.9 gpg | Very hard | Commonly used |
| Oxnard, CA | 319 mg/L · 18.6 gpg | Very hard | Commonly used |
| Sunrise Manor, NV | 280 mg/L · 16.4 gpg | Very hard | Commonly used |
| Spring Valley, NV | 280 mg/L · 16.4 gpg | Very hard | Commonly used |
| Corona, CA | 146 mg/L · 8.5 gpg | Hard | Optional, common |
| Syracuse, NY | 127 mg/L · 7.4 gpg | Hard | Optional, common |
| Metairie, LA | 78 mg/L · 4.6 gpg | Moderately hard | Usually not needed |
| Warren, MI | 105 mg/L · 6.1 gpg | Moderately hard | Usually not needed |
| West Valley City, UT | 176 mg/L · 10.3 gpg | Hard | Optional, common |
| Simi Valley, CA | 140 mg/L · 8.2 gpg | Hard | Optional, common |
| Thousand Oaks, CA | 140 mg/L · 8.2 gpg | Hard | Optional, common |
| Vallejo, CA | 153 mg/L · 8.9 gpg | Hard | Optional, common |
| Concord, CA | 74 mg/L · 4.3 gpg | Moderately hard | Usually not needed |
| Independence, MO | 123 mg/L · 7.2 gpg | Hard | Optional, common |
| West Jordan, UT | 183 mg/L · 10.7 gpg | Very hard | Commonly used |
| Richmond, CA | 68 mg/L · 4 gpg | Moderately hard | Usually not needed |
| Carlsbad, CA | 230 mg/L · 13.4 gpg | Very hard | Commonly used |
| Santa Maria, CA | 315 mg/L · 18.4 gpg | Very hard | Commonly used |
| Enterprise, NV | 280 mg/L · 16.4 gpg | Very hard | Commonly used |
| Centennial, CO | 105 mg/L · 6.1 gpg | Moderately hard | Usually not needed |
| Dearborn, MI | 102 mg/L · 6 gpg | Moderately hard | Usually not needed |
| Yuma, AZ | 345 mg/L · 20.2 gpg | Very hard | Commonly used |
| Whitney, NV | 280 mg/L · 16.4 gpg | Very hard | Commonly used |
| Winchester, NV | 280 mg/L · 16.4 gpg | Very hard | Commonly used |
Tap water hardness as published by each city's water utility. For any other town, look it up on the map.
Step 2: decide by hardness
| Hardness | What you'll notice | Softener |
|---|---|---|
| Soft: under 3.5 gpg (60 mg/L) | Soap lathers easily, little or no scale | Not needed |
| Moderately hard: 3.5–7 gpg | Light spots on glass and fixtures | Usually not needed |
| Hard: 7–10.5 gpg | Scale in kettles and showerheads, spotting, more detergent | Optional; many homes choose one |
| Very hard: over 10.5 gpg (180 mg/L) | Heavy scale, water heater sediment, stiff laundry | Commonly used |
Hard water is not a health risk. The case for a softener is about scale, cleaning and appliance upkeep (see hard water and your water heater), weighed against salt, water use and added sodium.
Step 3: size the softener
Softeners are rated by how many grains of hardness they remove between regenerations. Work out how many grains your household uses per day, multiply by the number of days you want between regenerations, and choose a softener rated above that at the salt setting you plan to use.
Grains per day = people × gallons per person per day × hardness (gpg)
EPA puts average indoor use at about 82 gallons per person per day; your actual use may be lower or higher.
Water softener size calculator
If your water also contains iron or manganese, ask the manufacturer how to adjust the size, since they use up softening capacity. Ratings depend on the salt setting, so compare softeners at the same salt dose.
Trade-offs to know before you buy
- Sodium: softening adds about 8 mg/L of sodium per gpg removed. Many homes keep an unsoftened cold tap in the kitchen for drinking and cooking. Calculate the sodium in your softened water.
- Salt: you'll refill the brine tank with salt. Potassium chloride can replace sodium chloride but costs more and can need more per regeneration. Some California communities restrict salt-based softeners: see salt-free vs salt-based softeners.
- Water and septic: each regeneration uses about 50 gallons that go down the drain.
- Regeneration control: demand-initiated (metered) models regenerate only when needed and usually use less salt and water than timer models.
- Certification: look for NSF/ANSI 44 or the WQA Gold Seal on the softener.
- A softener is not a filter: it doesn't remove PFAS, lead or bacteria. See filters that remove PFAS.
Thinking of a softener for skin problems? See what research found about hard water and eczema.
Need a measurement first? See how to test your water hardness.
Frequently asked questions
At what hardness do you need a water softener?
There is no legal or health threshold: hard water is not a health risk. Most households start to notice scale and spotting once water is hard (over about 7 grains per gallon, 120 mg/L), and softeners are common in very hard water areas (over 10.5 gpg, 180 mg/L).
How much sodium does a water softener add?
About 8 mg of sodium per liter for each grain per gallon of hardness removed, according to the University of Nebraska–Lincoln. Water that starts at 10 gpg ends up with about 80 mg/L of sodium. People on low-sodium diets should ask their doctor, or keep an unsoftened cold tap for drinking.
How much water does a softener use?
Each regeneration uses roughly 50 gallons of water, according to the University of Nebraska–Lincoln. Demand-initiated (metered) softeners regenerate only when needed and generally use less salt and water than timer models.
Can I use softened water on plants?
It isn't recommended for repeated watering of plants, lawns or gardens, because of the sodium. Many homes plumb outdoor taps to bypass the softener.
Is a softener OK with a septic system?
Regeneration water goes down the drain, which adds load to a septic system. Check with your septic professional; demand-initiated models reduce how often it happens.