Water hardness in Fort Worth, TX

Tap water in Fort Worth is hard: about 128 mg/L (7.5 grains per gallon), ranging from 103 to 154 mg/L, as reported by Fort Worth Water.

34% softer than the Texas median (194 mg/L) 185th hardest of 251 Texas towns Population 978,468
128mg/L
7.5 grains per gallon
Hard

Utility-reported value. The 2025 Water Quality Report lists total hardness of 6 to 9 grains per gallon (about 103 to 154 mg/L). Value shown is the midpoint. Source: Fort Worth Water (2025). Local groundwater and surface water around Fort Worth measures harder (median 363 mg/L), which matters if you are on a private well.

Fort Worth tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 128 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 7.5 gpg (7.2 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Local source water measurements

Median of nearby sites363 mg/L
Monitoring sites37
Lab samples164
Sample years2000–2006
Middle 50% of sites354–378 mg/L
Groundwater (wells, springs)371 mg/L · 29 sites
Surface water (rivers, lakes)108 mg/L · 8 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Fort Worth

Prefilled with Fort Worth's utility-reported hardness of 128 mg/L (7.5 gpg).

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Fort Worth tap water

City of Fort Worth is the main public water system for Fort Worth. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 20 samples taken Jan 2023 – Jan 2024. 7 PFAS were detected. The highest PFHxS and PFOA and PFOS results were above EPA's drinking water limit (10 ppt / 4 ppt).

ChemicalHighest resultDetected inEPA limit
PFHxS
perfluorohexane sulfonic acid
25.8 ppt 8 of 20 samples 10 ppt*
PFHxA
perfluorohexanoic acid
10.6 ppt 16 of 20 samples —
PFBA
perfluorobutanoic acid
10 ppt 20 of 20 samples —
PFOA
perfluorooctanoic acid
8.3 ppt 8 of 20 samples 4 ppt
PFOS
perfluorooctane sulfonic acid
7.3 ppt 8 of 20 samples 4 ppt
PFPeA
perfluoropentanoic acid
6.2 ppt 19 of 20 samples —
PFBS
perfluorobutane sulfonic acid
4.9 ppt 10 of 20 samples —

Other water systems serving parts of Fort Worth

Water systemPFAS detectedHighest PFOA / PFOSTested
Johnson County Sud
serves over 10,000 people
PFBA, PFPeA, PFHxA +1 more — Jan 2024 – Feb 2025
City of Arlington
serves over 10,000 people
PFBA, PFPeA, PFBS +2 more ND / 4.6 ppt Jun 2023 – Jun 2024
Benbrook Water Authority
serves over 10,000 people
PFHpA, PFBA, PFBS — Jun 2024 – Mar 2025
Bethesda WSC
serves over 10,000 people
PFBA — Feb 2025 – Nov 2025
City of Forest Hill
serves over 10,000 people
PFBA, PFHxA, PFPeA +1 more — Mar 2023 – Mar 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Fort Worth

City of Fort Worth reported 300,778 service lines (the pipes connecting homes to the water main) in its inventory. 0 are lead and 32,590 are galvanized lines that must be replaced.

0lead (0%)
32,590galvanized requiring replacement
0unknown material (0%)
268,188not lead (89%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask City of Fort Worth whether your address is on its list.

Other water systems serving parts of Fort Worth

Water systemService linesTotal
Johnson County Sud0 lead · 0 galvanized · 0 unknown20,889
City of Arlington0 lead · 189 galvanized · 0 unknown102,853
Benbrook Water Authority0 lead · 0 galvanized · 0 unknown9,128
Bethesda WSC0 lead · 241 galvanized · 32 unknown11,283
City of Forest Hill0 lead · 0 galvanized · 4,417 unknown4,792

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Fort Worth drinking water violations

EPA records show 1 health-based violation for City of Fort Worth since 2016, all since resolved or closed. The most recent began in Mar 2021. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Contaminant or ruleTypeViolationsMost recentStatus
Surface water treatment (Long Term 2 rule)
extra treatment or covered reservoirs to protect against microbes
Treatment requirement not met 1 Mar 2021 Resolved/closed

Other water systems serving parts of Fort Worth

Water systemHealth-based violationsMonitoring/reporting
Johnson County SudNone15
City of ArlingtonNone1
Benbrook Water AuthorityNone39
Bethesda WSCNone14
City of Forest HillNone1

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Fort Worth

SiteTypeDistanceMedianSamplesYears
TRINITY R AT BEACH ST
Texas Commission on Environmental Quality
River/Stream 4 mi168 mg/L232000–2002
WEST FORK TRINITY AT GATEWAY
Texas Commission on Environmental Quality
River/Stream 4.4 mi170 mg/L372003–2006
WEST FORK TRINITY AT EAST 1ST
Texas Commission on Environmental Quality
River/Stream 4.7 mi154 mg/L72002
XU-32-13-8 (WJEGTA529)
USGS Texas Water Science Center
Well 5 mi372 mg/L22004
XU-32-13-8 (WUSGSTA001)
USGS Texas Water Science Center
Well 5 mi385 mg/L12004
XU-32-13-8 (WJEGTA527)
USGS Texas Water Science Center
Well 5 mi482 mg/L22004

Water hardness in towns near Fort Worth

TownDistanceMedianClass
Haltom City5 mi 110 mg/LModerately hard
Saginaw6 mi 366 mg/LVery hard
White Settlement7 mi 370 mg/LVery hard
Watauga8 mi 168 mg/LHard
North Richland Hills9 mi 168 mg/LHard
Forest Hill10 mi 120 mg/LModerately hard
Benbrook10 mi 370 mg/LVery hard
Hurst10 mi 189 mg/LVery hard
Kennedale12 mi 154 mg/LHard
Keller13 mi 138 mg/LHard

Tarrant County

Fort Worth is in Tarrant County, where the median is 355 mg/L (very hard) across 59 sites.

See all of Tarrant County →

Texas

The statewide median is 194 mg/L (very hard) from 2,271 sites.

Texas hardness map →

Fort Worth, TX water: common questions

Do I need a water softener in Fort Worth?

Many homes here use one. Fort Worth's tap water is 7.5 gpg (128 mg/L, utility-reported), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 13,000 grains.Size it for your household →

Who supplies Fort Worth's drinking water?

The main public water system serving Fort Worth in EPA records is City of Fort Worth. Some neighborhoods may be served by a different system, so check the name on your water bill.Fort Worth Water water quality report →

Do I need a water filter in Fort Worth?

It depends on what you want to remove. In Fort Worth, EPA testing found PFHxS, PFHxA and PFBA and 4 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system had 1 health-based violation since 2016, for the Long Term 2 Enhanced Surface Water Treatment Rule; the utility's annual report says what was done about it. On the other hand, no lead service lines reported. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next