How to read your water quality report
Updated November 20, 2026 · Based on EPA and other public sources listed below · How we make our content
Short answer: your utility's Consumer Confidence Report (CCR) arrives every year by July 1. For each regulated contaminant it found, compare your level (and its range) with the MCL, the legal limit. The MCLG is a health goal, often lower, and not enforceable. Violations must be listed with what the utility is doing about them.
What EPA requires in every report
- The source of your water: the lake, river or aquifer.
- A summary of the risk of contamination of that source.
- The regulated contaminants found in your drinking water.
- Potential health effects of any contaminant found in violation of an EPA standard, and what the system is doing to fix it.
- An educational statement on Cryptosporidium for vulnerable people, and information on nitrate, arsenic or lead where relevant.
- Phone numbers for the water system and EPA's Safe Drinking Water Hotline (1-800-426-4791).
Reading the contaminant table
| Column | What it means |
|---|---|
| MCLG | Health goal: the level below which no health risk is expected. Not enforceable; for some contaminants (lead, PFOA, PFOS) it is zero. |
| MCL | The enforceable legal limit. |
| Level detected / range | The utility's result (often an average) and the lowest to highest samples. |
| Violation (Y/N) | Whether the system broke the rule for that contaminant during the year. |
| Likely source | Where the contaminant usually comes from, such as natural deposits or disinfection byproducts. |
| Units | ppm = mg/L; ppb = µg/L; ppt = ng/L. Hardness is usually in mg/L or grains per gallon (converter). |
Lead and copper are reported differently: as the 90th percentile of home tap samples compared with an action level, not an MCL. Hardness, if listed, often appears in a separate table of "unregulated" or "secondary" items, because it has no federal limit.
What our town pages add
Your town's page on this site shows your water system's EPA records side by side: PFAS test results, lead service lines and health-based violations since 2016, plus measured hardness. Use it alongside your utility's report. Find your town →
Unfamiliar names in the violations list? See TTHM, coliform bacteria, nitrate and arsenic.
Comparing with bottled water? See how bottled and tap water standards differ.
Frequently asked questions
When do I get my water quality report?
EPA requires community water systems to send their Consumer Confidence Report to customers every year by July 1.
How do I find my water quality report?
Call your water supplier, check its website, or use EPA's CCR search tool. Renters and people whose bill goes to a landlord can ask the utility for a copy.
What is the difference between MCL and MCLG?
The MCLG (maximum contaminant level goal) is the level with no expected health risk; it isn't enforceable. The MCL (maximum contaminant level) is the enforceable legal limit, set as close to the goal as EPA considers feasible.
What do ppm and ppb mean?
Parts per million (ppm) equals milligrams per liter (mg/L); parts per billion (ppb) equals micrograms per liter (µg/L). PFAS are reported in parts per trillion (ppt), a thousand times smaller than ppb.