Water hardness in Benbrook, TX

Water in Benbrook is very hard, with a median of 370 mg/L (21.6 grains per gallon) across 31 monitoring sites within 10 miles.

91% harder than the Texas median (194 mg/L) 14th hardest of 251 Texas towns Population 24,336
370mg/L
21.6 grains per gallon
Very hard

Benbrook tap water at a glance

  • HardnessVery hard (370 mg/L, 21.6 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • PFAS3 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
  • Lead pipesNo lead service lines reported.Details →
  • ViolationsNo health-based violations since 2016.EPA record →

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 370 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 21.6 gpg (20.7 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites31
Lab samples38
Sample years2001–2016
Middle 50% of sites358–382 mg/L
Groundwater (wells, springs)371 mg/L · 29 sites
Surface water (rivers, lakes)113 mg/L · 2 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Benbrook

Prefilled with Benbrook's measured local hardness of 370 mg/L (21.6 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Benbrook tap water

Benbrook Water Authority is the main public water system for Benbrook. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 20 samples taken Jun 2024 – Mar 2025. 3 PFAS were detected.

ChemicalHighest resultDetected inEPA limit
PFHpA
perfluoroheptanoic acid
6.4 ppt 1 of 20 samples —
PFBA
perfluorobutanoic acid
5.1 ppt 1 of 20 samples —
PFBS
perfluorobutane sulfonic acid
3.1 ppt 1 of 20 samples —

Other water systems serving parts of Benbrook

Water systemPFAS detectedHighest PFOA / PFOSTested
City of Fort Worth
serves over 10,000 people
PFHxS, PFHxA, PFBA +4 more 8.3 / 7.3 ppt Jan 2023 – Jan 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Benbrook

Benbrook Water Authority reported 9,128 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.

0lead (0%)
0galvanized requiring replacement
0unknown material (0%)
9,128not lead (100%)

Other water systems serving parts of Benbrook

Water systemService linesTotal
City of Fort Worth0 lead · 32,590 galvanized · 0 unknown300,778

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Benbrook drinking water violations

EPA records show no health-based violations for Benbrook Water Authority since 2016. It also had 39 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Benbrook

Water systemHealth-based violationsMonitoring/reporting
City of Fort Worth11

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Benbrook

SiteTypeDistanceMedianSamplesYears
Benbrook Lk Site CC nr Fort Worth, TX
USGS Texas Water Science Center
Lake, Reservoir, Impoundment 3.3 mi120 mg/L12016
XU-32-13-8 (WJEGTA511)
USGS Texas Water Science Center
Well 6.2 mi602 mg/L12004
XU-32-13-8 (WJEGTA510)
USGS Texas Water Science Center
Well 6.2 mi932 mg/L12004
XU-32-13-8 (WJEGTA512)
USGS Texas Water Science Center
Well 6.2 mi481 mg/L12004
XU-32-13-8 (WCOETA010)
USGS Texas Water Science Center
Well 6.2 mi462 mg/L12004
XU-32-13-8 (WUSGSTA001)
USGS Texas Water Science Center
Well 6.2 mi385 mg/L12004

Water hardness in towns near Benbrook

TownDistanceMedianClass
White Settlement5 mi 370 mg/LVery hard
Crowley9 mi 125 mg/LHard
Fort Worth10 mi 128 mg/LHard
Forest Hill12 mi 120 mg/LModerately hard
Burleson14 mi 130 mg/LHard
Saginaw14 mi 366 mg/LVery hard
Kennedale15 mi 154 mg/LHard
Haltom City15 mi 110 mg/LModerately hard
Rendon15 mi 110 mg/LModerately hard
Azle16 mi 355 mg/LVery hard

Tarrant County

Benbrook is in Tarrant County, where the median is 355 mg/L (very hard) across 59 sites.

See all of Tarrant County →

Texas

The statewide median is 194 mg/L (very hard) from 2,271 sites.

Texas hardness map →

Benbrook, TX water: common questions

Do I need a water softener in Benbrook?

Very likely. Water measured around Benbrook is 21.6 gpg (370 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 38,000 grains.Size it for your household →

Who supplies Benbrook's drinking water?

The main public water system serving Benbrook in EPA records is Benbrook Water Authority. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Benbrook?

It depends on what you want to remove. In Benbrook, EPA testing found PFHpA, PFBA and PFBS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next