Water hardness in Burleson, TX
Water in Burleson is hard, with a median of 130 mg/L (7.6 grains per gallon) across 3 monitoring sites within 10 miles.
Burleson tap water at a glance
- HardnessHard (130 mg/L, 7.6 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- PFAS4 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
- Lead pipesThe water system reported 6 lead service lines.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 130 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 7.6 gpg (7.3 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Burleson
Prefilled with Burleson's measured local hardness of 130 mg/L (7.6 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Burleson tap water
City of Burleson is the main public water system for Burleson. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Oct 2023 – Jul 2024. 4 PFAS were detected.
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFBA perfluorobutanoic acid | 8.1 ppt | 3 of 4 samples | — |
| PFBS perfluorobutane sulfonic acid | 3.6 ppt | 1 of 4 samples | — |
| PFHxA perfluorohexanoic acid | 3.5 ppt | 1 of 4 samples | — |
| PFPeA perfluoropentanoic acid | 3.4 ppt | 2 of 4 samples | — |
Other water systems serving parts of Burleson
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Johnson County Sud serves over 10,000 people | PFBA, PFPeA, PFHxA +1 more | — | Jan 2024 – Feb 2025 |
| Bethesda WSC serves over 10,000 people | PFBA | — | Feb 2025 – Nov 2025 |
| City of Fort Worth serves over 10,000 people | PFHxS, PFHxA, PFBA +4 more | 8.3 / 7.3 ppt | Jan 2023 – Jan 2024 |
| Mountain Peak Sud serves over 10,000 people | PFBA, PFPeA, PFOS +2 more | ND / 6.2 ppt | Sep 2023 – Dec 2024 |
| City of Cleburne serves over 10,000 people | PFBA | — | Jun 2023 – Apr 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Burleson
City of Burleson reported 15,543 service lines (the pipes connecting homes to the water main) in its inventory. 6 are lead and 219 are galvanized lines that must be replaced.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask City of Burleson whether your address is on its list.
Other water systems serving parts of Burleson
| Water system | Service lines | Total |
|---|---|---|
| Johnson County Sud | 0 lead · 0 galvanized · 0 unknown | 20,889 |
| Bethesda WSC | 0 lead · 241 galvanized · 32 unknown | 11,283 |
| City of Fort Worth | 0 lead · 32,590 galvanized · 0 unknown | 300,778 |
| Mountain Peak Sud | 0 lead · 0 galvanized · 2,666 unknown | 7,687 |
| City of Cleburne | 0 lead · 1 galvanized · 10,375 unknown | 14,165 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Burleson drinking water violations
EPA records show no health-based violations for City of Burleson since 2016.
Other water systems serving parts of Burleson
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Johnson County Sud | None | 15 |
| Bethesda WSC | None | 14 |
| City of Fort Worth | 1 | 1 |
| Mountain Peak Sud | 1 | 8 |
| City of Cleburne | None | 4 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Burleson
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| N FORK DEER CREEK AT ATSF RR Texas Commission on Environmental Quality | River/Stream | 5.2 mi | 106 mg/L | 2 | 2001 |
| VILLAGE CREEK AT RENDON ROAD Texas Commission on Environmental Quality | River/Stream | 7 mi | 130 mg/L | 1 | 2002 |
| Village Ck at Everman, TX USGS Texas Water Science Center | Stream | 7 mi | 182 mg/L | 16 | 2000–2002 |
Water hardness in towns near Burleson
| Town | Distance | Median | Class |
|---|---|---|---|
| Crowley | 5 mi | 125 mg/L | Hard |
| Rendon | 7 mi | 110 mg/L | Moderately hard |
| Forest Hill | 11 mi | 120 mg/L | Moderately hard |
| Kennedale | 11 mi | 154 mg/L | Hard |
| Cleburne | 12 mi | 280 mg/L | Very hard |
| Mansfield | 13 mi | 163 mg/L | Hard |
| Benbrook | 14 mi | 370 mg/L | Very hard |
| Arlington | 17 mi | 160 mg/L | Hard |
| White Settlement | 18 mi | 370 mg/L | Very hard |
| Fort Worth | 18 mi | 128 mg/L | Hard |
Johnson County
Burleson is in Johnson County, where the median is 280 mg/L (very hard) across 3 sites.
See all of Johnson County →Burleson, TX water: common questions
Do I need a water softener in Burleson?
Many homes here use one. Water measured around Burleson is 7.6 gpg (130 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 14,000 grains.Size it for your household →
Who supplies Burleson's drinking water?
The main public water system serving Burleson in EPA records is City of Burleson. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Burleson?
It depends on what you want to remove. In Burleson, EPA testing found PFBA, PFBS and PFHxA and 1 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system reports 6 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 4 PFAS in Burleson's main water system.
- How to tell if your home has a lead pipe6 lead service lines are reported here.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.