What PFAS levels in drinking water mean
Updated November 20, 2026 · Based on EPA and other public sources listed below · How we make our content
Short answer: PFAS in tap water are measured in parts per trillion (ppt). EPA's enforceable limit is 4 ppt each for PFOA and PFOS and 10 ppt each for PFHxS, PFNA and GenX, judged as a yearly average from 2029. EPA's health goal for PFOA and PFOS is zero.
What "parts per trillion" means
One part per trillion (ppt) is one nanogram of a chemical in one liter of water (1 ng/L). Labs report PFAS in ppt, ng/L or µg/L; 1 µg/L equals 1,000 ppt. On our town pages every value is converted to ppt.
Each lab also has a minimum reporting level, the smallest amount it can measure reliably. In EPA's UCMR 5 study it was between 2 and 20 ppt depending on the chemical (4 ppt for PFOA and PFOS). "Not detected" means below that level, not necessarily zero.
EPA limits for PFAS in drinking water
| Chemical | Health goal (MCLG) | Enforceable limit (MCL) | Status |
|---|---|---|---|
| PFOA | 0 | 4 ppt | Final (2024); EPA's 2026 proposal keeps it |
| PFOS | 0 | 4 ppt | Final (2024); EPA's 2026 proposal keeps it |
| PFHxS | 10 ppt | 10 ppt | Final (2024); EPA proposed withdrawing it in 2026 |
| PFNA | 10 ppt | 10 ppt | Final (2024); EPA proposed withdrawing it in 2026 |
| GenX (HFPO-DA) | 10 ppt | 10 ppt | Final (2024); EPA proposed withdrawing it in 2026 |
| Mixtures of PFHxS, PFNA, GenX and PFBS | Hazard Index of 1 | Final (2024); EPA proposed withdrawing it in 2026 | |
The health goal (maximum contaminant level goal, MCLG) is the level with no expected health risk. It is not enforceable. For PFOA and PFOS EPA set it at zero, because it found no level of exposure without cancer risk. The enforceable limit (maximum contaminant level, MCL) is what water systems must meet. EPA set it at 4 ppt, the lowest level it considered feasible to measure and treat.
Why the limits are so low
PFAS break down extremely slowly and can build up in the body over time. EPA lists these health effects linked to exposure to some PFAS, including PFOA and PFOS:
- harm to pregnancies and developing babies,
- decreased vaccine response in children,
- increased risk of some cancers and liver damage,
- higher cholesterol.
Drinking water is one of several sources of exposure, along with food, air, soil and household products.
Systems must meet the limits as a running annual average starting in 2029. In 2026 EPA proposed letting some systems apply for an extension to 2031. Until a proposal is final, the 2024 rule is the law.
How US cities compare
In EPA's UCMR 5 study (Jan 2023 – Jun 2026), 10,312 public water systems tested treated drinking water for 29 PFAS. On this site we matched 2,685 towns to their main water system. Their highest single PFOA or PFOS result:
| Highest PFOA or PFOS result | Towns | Share |
|---|---|---|
| No PFAS of any kind detected | 1,563 | 58% |
| Above 4 ppt (the EPA limit) | 567 | 21% |
| Above 10 ppt | 205 | 8% |
| Above 20 ppt | 75 | 3% |
Large cities where at least one PFOA or PFOS sample was above 4 ppt include Philadelphia, PA, Dallas, TX, Austin, TX, Fort Worth, TX, Columbus, OH, El Paso, TX, Louisville/Jefferson County metro government, KY and Fresno, CA. See every state and the largest cities on our PFAS map and tables.
How to read your town's PFAS results
- Highest result is the single highest sample for that chemical. It shows the worst day measured, not the average you drink.
- Detected in x of y samples shows how often the chemical turned up. Detected in 1 of 12 samples is very different from 12 of 12.
- Main water system is the utility whose name matches your town. Many towns are served by several systems, so check your water bill for the name of yours.
- Your utility's annual Consumer Confidence Report lists its own PFAS results, including any samples taken after UCMR 5.
If your results are above the limit
- Read your utility's latest Consumer Confidence Report, or ask the utility what treatment it plans before 2029.
- If you want to lower PFAS at home now, use a filter certified to reduce PFAS. See which water filters remove PFAS.
- Boiling water does not remove PFAS.
- On a private well, only a lab test tells you what is in your water. UCMR 5 covers public systems only.
Frequently asked questions
What is a safe level of PFAS in drinking water?
EPA's health-based goal for PFOA and PFOS is zero, because it found no level of exposure without cancer risk. The enforceable limit is 4 parts per trillion (ppt) each, the lowest level EPA considered feasible for water systems to measure and treat.
What does 4 ppt mean?
Four parts per trillion is the same as 4 nanograms per liter. It is an extremely small concentration, which is why PFAS testing needs specialised laboratories.
Is my water system breaking the law if a result is above 4 ppt?
Not on one sample. Systems must meet the limit as a running annual average, and the deadline is 2029 (EPA proposed in 2026 to let some systems apply for an extension to 2031).
Does boiling water remove PFAS?
No. Boiling does not remove PFAS. Filters certified to reduce PFAS can.
Sources
- EPA: Per- and Polyfluoroalkyl Substances (PFAS) drinking water regulation
- Federal Register: PFAS National Primary Drinking Water Regulation (April 26, 2024)
- EPA: Fifth Unregulated Contaminant Monitoring Rule (UCMR 5)
- EPA Office of Water: Proposed actions related to PFAS in drinking water (July 2026, PDF)