Water hardness in Philadelphia, PA

Tap water in Philadelphia is hard: about 125 mg/L (7.3 grains per gallon), ranging from 100 to 150 mg/L, as reported by Philadelphia Water Department.

52% harder than the Pennsylvania median (82 mg/L) 46th hardest of 83 Pennsylvania towns Population 1,550,542
125mg/L
7.3 grains per gallon
Hard

Utility-reported value. PWD says tap water is typically about 100 to 150 ppm (6 to 9 gpg) and varies across the city. Value shown is the midpoint. Source: Philadelphia Water Department (accessed 2026). Local groundwater and surface water around Philadelphia measures harder (median 174 mg/L), which matters if you are on a private well.

Philadelphia tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 125 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 7.3 gpg (7 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Local source water measurements

Median of nearby sites174 mg/L
Monitoring sites21
Lab samples1,744
Sample years2000–2026
Middle 50% of sites132–195 mg/L
Surface water (rivers, lakes)174 mg/L · 21 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Philadelphia

Prefilled with Philadelphia's utility-reported hardness of 125 mg/L (7.3 gpg).

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Philadelphia tap water

Philadelphia Water Department is the main public water system for Philadelphia. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 12 samples taken Jan 2024 – Oct 2024. 8 PFAS were detected. The highest PFOA and PFOS results were above EPA's drinking water limit (4 ppt).

ChemicalHighest resultDetected inEPA limit
PFBS
perfluorobutane sulfonic acid
10 ppt 7 of 12 samples —
PFPeA
perfluoropentanoic acid
9.9 ppt 9 of 12 samples —
PFHxA
perfluorohexanoic acid
9.1 ppt 10 of 12 samples —
PFOA
perfluorooctanoic acid
8.1 ppt 8 of 12 samples 4 ppt
PFBA
perfluorobutanoic acid
7.6 ppt 4 of 12 samples —
PFOS
perfluorooctane sulfonic acid
6 ppt 6 of 12 samples 4 ppt
PFNA
perfluorononanoic acid
4.5 ppt 2 of 12 samples 10 ppt*
PFHpA
perfluoroheptanoic acid
3.3 ppt 4 of 12 samples —

Other water systems serving parts of Philadelphia

Water systemPFAS detectedHighest PFOA / PFOSTested
Aqua Pa Main System
serves over 10,000 people
PFPeA, PFHxA, PFOA +6 more 12.6 / 9.2 ppt Feb 2024 – Dec 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Philadelphia

Philadelphia Water Department reported 527,919 service lines (the pipes connecting homes to the water main) in its inventory. 16,805 are lead and 1,777 are galvanized lines that must be replaced, and 351,513 are still of unknown material.

16,805lead (3%)
1,777galvanized requiring replacement
351,513unknown material (67%)
157,824not lead (30%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Philadelphia Water Department whether your address is on its list.

Other water systems serving parts of Philadelphia

Water systemService linesTotal
Aqua Pa Main System55 lead · 4,595 galvanized · 39,217 unknown305,008

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Philadelphia drinking water violations

EPA records show no health-based violations for Philadelphia Water Department since 2016. It also had 8 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Philadelphia

Water systemHealth-based violationsMonitoring/reporting
Aqua Pa Main System244

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Philadelphia

SiteTypeDistanceMedianSamplesYears
Frankford Creek at Castor Ave, Philadelphia, PA
USGS Pennsylvania Water Science Center
Stream 2 mi195 mg/L52021
SCHUYLKILL RIVER
PA DEPARTMENT OF ENVIRONMENTAL PROTECTION
River/Stream 3.4 mi132 mg/L2262000–2026
Schuylkill R at Falls Bridge, Philadelphia, PA
USGS Pennsylvania Water Science Center
Stream 3.4 mi130 mg/L1842002–2023
Benjamin Franklin Bridge (RM 100.2)
Delaware River Basin Commission
River/Stream 3.9 mi66 mg/L1992005–2026
WISSAHICKON CREEK
PA DEPARTMENT OF ENVIRONMENTAL PROTECTION
River/Stream 3.9 mi203 mg/L1922000–2026
Betsy Ross Bridge (RM 104.75)
Delaware River Basin Commission
River/Stream 3.9 mi64 mg/L1962005–2026

Water hardness in towns near Philadelphia

TownDistanceMedianClass
Yeadon8 mi 144 mg/LHard
Ardmore9 mi 146 mg/LHard
Lansdowne9 mi 137 mg/LHard
Darby9 mi 144 mg/LHard
Willow Grove10 mi 157 mg/LHard
Drexel Hill10 mi 131 mg/LHard
Horsham12 mi 156 mg/LHard
Broomall12 mi 141 mg/LHard
Norristown13 mi 162 mg/LHard
King of Prussia14 mi 140 mg/LHard

Philadelphia County

Philadelphia is in Philadelphia County, where the median is 131 mg/L (hard) across 10 sites.

See all of Philadelphia County →

Pennsylvania

The statewide median is 82 mg/L (moderately hard) from 4,757 sites.

Pennsylvania hardness map →

Philadelphia, PA water: common questions

Do I need a water softener in Philadelphia?

Many homes here use one. Philadelphia's tap water is 7.3 gpg (125 mg/L, utility-reported), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 13,000 grains.Size it for your household →

Who supplies Philadelphia's drinking water?

The main public water system serving Philadelphia in EPA records is Philadelphia Water Department. Some neighborhoods may be served by a different system, so check the name on your water bill.Philadelphia Water Department water quality report →

Do I need a water filter in Philadelphia?

It depends on what you want to remove. In Philadelphia, EPA testing found PFBS, PFPeA and PFHxA and 5 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system reports 16,805 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next