How to test your water hardness
Updated November 20, 2026 · Based on EPA and other public sources listed below · How we make our content
Short answer: the quickest free check is to look up your town on our water hardness map or ask your water utility. At home, hardness test strips give a range in minutes. For a private well, a certified lab test gives an exact number. Then compare the result with the USGS classes below.
Four ways to test your water hardness
| Method | Best for | What you get |
|---|---|---|
| Look up your town (Canada) | Everyone, free | Measured hardness for your town or county |
| Ask your water utility | City water | The utility's own figure; check whether it is in mg/L or gpg |
| Test strips | A quick check at the tap | A range, read from a color chart |
| Certified lab | Private wells, sizing a softener | An exact number, often with iron and other minerals |
Using test strips
- Run the cold tap briefly and fill a clean glass. If you have a softener, test an unsoftened tap too, to see whether it is working.
- Dip the strip for the time on the package and compare its color with the chart.
- Note the unit on the chart (gpg or ppm) and convert if needed with the hardness converter.
Because strips give a range, use a lab test or your town's measured value when you size a water softener.
Reading the result
| USGS class | mg/L (ppm) | Grains per gallon |
|---|---|---|
| Soft | 0–60 | 0–3.5 |
| Moderately hard | 61–120 | 3.6–7.0 |
| Hard | 121–180 | 7.1–10.5 |
| Very hard | over 180 | over 10.5 |
Well owners: EPA recommends testing a private well regularly; a lab can test hardness along with the yearly checks. See how to test your well water, and iron and manganese if you see stains.
Frequently asked questions
How can I find out how hard my water is for free?
Look up your town on our water hardness map, which uses measurements from USGS, EPA and state agencies, or ask your water utility for its hardness figure.
How do water hardness test strips work?
You dip a strip in a water sample and compare the color change with the chart on the package. Strips show a range rather than an exact number.
What units do hardness tests use?
Usually grains per gallon (gpg), parts per million (ppm) or milligrams per liter (mg/L) as calcium carbonate. 1 gpg = 17.1 mg/L; ppm and mg/L are the same for water.
What hardness counts as hard water?
USGS classes: 0–60 mg/L soft, 61–120 moderately hard, 121–180 hard, and over 180 mg/L very hard.