Water hardness in Corona, CA

Tap water in Corona is hard: about 146 mg/L (8.5 grains per gallon), as reported by City of Corona Department of Water and Power.

about the same as the California median (158 mg/L) 371st hardest of 484 California towns Population 160,238
146mg/L
8.5 grains per gallon
Hard

Utility-reported value. The city's Consumer Confidence Report states average system hardness of 146 ppm (8.5 grains per gallon), classified as hard, varying with demand and season. Source: City of Corona Department of Water and Power (2025). Local groundwater and surface water around Corona measures harder (median 422 mg/L), which matters if you are on a private well.

Corona tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 146 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 8.5 gpg (8.2 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Local source water measurements

Median of nearby sites422 mg/L
Monitoring sites38
Lab samples291
Sample years2000–2023
Middle 50% of sites293–611 mg/L
Groundwater (wells, springs)475 mg/L · 33 sites
Surface water (rivers, lakes)204 mg/L · 5 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Corona

Prefilled with Corona's utility-reported hardness of 146 mg/L (8.5 gpg).

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Corona tap water

City of Corona is the main public water system for Corona. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 54 samples taken Sep 2023 – Sep 2024. 4 PFAS were detected. Every result with a federal limit was at or below it.

ChemicalHighest resultDetected inEPA limit
PFBA
perfluorobutanoic acid
7.6 ppt 2 of 54 samples —
PFPeA
perfluoropentanoic acid
6.1 ppt 4 of 54 samples —
PFHxA
perfluorohexanoic acid
3.8 ppt 1 of 54 samples —
PFHxS
perfluorohexane sulfonic acid
3.3 ppt 1 of 54 samples 10 ppt*

Other water systems serving parts of Corona

Water systemPFAS detectedHighest PFOA / PFOSTested
Elsinore Valley MWD
serves over 10,000 people
PFBA — Feb 2023 – Dec 2025
Western MWD
serves over 10,000 people
PFPeA, PFHxS, PFBS — Mar 2023 – Jan 2024
City of Riverside
serves over 10,000 people
PFPeA, PFHxA, PFOS ND / 4 ppt Feb 2023 – Nov 2023
Jurupa Community
serves over 10,000 people
None detected — Apr 2023 – Feb 2024
Temescal Valley Water District
serves over 10,000 people
None detected — Oct 2024 – Jul 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Corona

City of Corona reported 46,189 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 19,144 lines are still of unknown material.

0lead (0%)
0galvanized requiring replacement
19,144unknown material (41%)
27,045not lead (59%)

Other water systems serving parts of Corona

Water systemService linesTotal
Elsinore Valley MWD0 lead · 0 galvanized · 0 unknown42,639
Western MWD0 lead · 0 galvanized · 0 unknown23,306
City of Riverside0 lead · 0 galvanized · 0 unknown68,071
Jurupa Community0 lead · 0 galvanized · 0 unknown32,406
Temescal Valley Water District0 lead · 0 galvanized · 0 unknown6,749

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Corona drinking water violations

EPA records show no health-based violations for City of Corona since 2016. It also had 68 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Corona

Water systemHealth-based violationsMonitoring/reporting
Elsinore Valley MWDNone0
Western MWDNone0
City of RiversideNone0
Jurupa CommunityNone0
Temescal Valley Water DistrictNone1

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Corona

SiteTypeDistanceMedianSamplesYears
003S006W31D001S
USGS California Water Science Center
Well 0.9 mi436 mg/L32000–2022
003S007W35C001S
USGS California Water Science Center
Well 1.4 mi481 mg/L52000–2017
003S007W26G001S
USGS California Water Science Center
Well 1.7 mi339 mg/L12007
003N007W35C003S
USGS California Water Science Center
Well 2.5 mi421 mg/L12022
SANTA ANA R BL PRADO DAM CA
USGS California Water Science Center
Stream 4.8 mi292 mg/L2212000–2023
003S007W10A002S
USGS California Water Science Center
Well 5 mi837 mg/L12001

Water hardness in towns near Corona

TownDistanceMedianClass
Home Gardens3 mi 476 mg/LVery hard
Norco4 mi 430 mg/LVery hard
El Sobrante6 mi 478 mg/LVery hard
Eastvale7 mi 421 mg/LVery hard
Chino10 mi 309 mg/LVery hard
Chino Hills11 mi 312 mg/LVery hard
Anaheim11 mi 317 mg/LVery hard
Riverside11 mi 400 mg/LVery hard
Jurupa Valley11 mi 302 mg/LVery hard
Woodcrest11 mi 402 mg/LVery hard

Riverside County

Corona is in Riverside County, where the median is 177 mg/L (hard) across 399 sites.

See all of Riverside County →

California

The statewide median is 158 mg/L (hard) from 5,772 sites.

California hardness map →

Corona, CA water: common questions

Do I need a water softener in Corona?

Many homes here use one. Corona's tap water is 8.5 gpg (146 mg/L, utility-reported), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 15,000 grains.Size it for your household →

Who supplies Corona's drinking water?

The main public water system serving Corona in EPA records is City of Corona. Some neighborhoods may be served by a different system, so check the name on your water bill.City of Corona Department of Water and Power water quality report →

Do I need a water filter in Corona?

It depends on what you want to remove. In Corona, EPA testing found PFBA, PFPeA and PFHxA and 1 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next