Water hardness in Whatcom County, WA
Water in Whatcom County is hard, with a median of 125 mg/L (7.3 grains per gallon) across 104 monitoring sites.
Whatcom County water at a glance
- HardnessHard (125 mg/L, 7.3 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 125 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 7.3 gpg (7 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Whatcom County
Prefilled with Whatcom County's measured local hardness of 125 mg/L (7.3 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Whatcom County on the Washington map
Cities and communities in Whatcom County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Bellingham | 120 | Hard | 27 sites within 10 miles |
| Lynden | 134 | Hard | 66 sites within 10 miles |
| Ferndale | 132 | Hard | 66 sites within 10 miles |
| Birch Bay (CDP) | 110 | Moderately hard | 16 sites within 10 miles |
| Sudden Valley (CDP) | 37 | Soft | 3 sites within 10 miles |
| Blaine | 125 | Hard | county median |
| Marietta-Alderwood (CDP) | 120 | Hard | 33 sites within 10 miles |
| Peaceful Valley (CDP) | 169 | Hard | 13 sites within 10 miles |
| Everson | 134 | Hard | 66 sites within 10 miles |
| Geneva (CDP) | 66 | Moderately hard | 8 sites within 10 miles |
| Sumas | 140 | Hard | 59 sites within 10 miles |
| Nooksack | 134 | Hard | 66 sites within 10 miles |
| Point Roberts (CDP) | 125 | Hard | county median |
| Custer (CDP) | 95 | Moderately hard | 38 sites within 10 miles |
| Deming (CDP) | 162 | Hard | 29 sites within 10 miles |
| Maple Falls (CDP) | 125 | Hard | county median |
| Acme (CDP) | 125 | Hard | county median |
| Glacier (CDP) | 125 | Hard | county median |
| Kendall (CDP) | 166 | Hard | 14 sites within 10 miles |
Water quality in Whatcom County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Bellingham | City of Bellingham-Water Division | None detected | 0 lead · 0 unknown | None |
| Lynden | Lynden Water Department | None detected | 0 lead · 0 unknown | 1 |
| Ferndale | Ferndale | None detected | 0 lead · 0 unknown | None |
| Birch Bay | Birch Bay Water & Sewer District | None detected | 0 lead · 0 unknown | None |
| Blaine | City of Blaine | None detected | 0 lead · 1,729 unknown | None |
| Everson | City of Everson | None detected | 0 lead · 0 unknown | None |
| Sumas | Sumas Water Dept | Not tested | 0 lead · 86 unknown | None |
| Nooksack | Nooksack Water Dept | Not tested | 0 lead · 0 unknown | None |
| Glacier | Glacier Water District | Not tested | 0 lead · 0 unknown | None |
Neighboring counties
- Skagit County9 mg/L
- Snohomish County31 mg/L
- Island County289 mg/L
- San Juan County163 mg/L
- Chelan County10 mg/L
- Kitsap County88 mg/L
Washington
The statewide median is 74 mg/L (moderately hard) from 890 sites.
Washington hardness map →Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.