Water hardness in Cumberland County, NC
Water in Cumberland County is soft, with a median of 12 mg/L (0.7 grains per gallon) across 12 monitoring sites.
Cumberland County water at a glance
- HardnessSoft (12 mg/L, 0.7 gpg, local measurements). A water softener isn't needed.Water heater care →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 12 mg/L means at home
- Water softener: A water softener is generally not needed. Soft water rarely causes scale.
- Dishwasher: set the water hardness to about 0.7 gpg (0.7 °dH), which is the lowest hardness setting (or softener off).
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Cumberland County
Prefilled with Cumberland County's measured local hardness of 12 mg/L (0.7 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Cumberland County on the North Carolina map
Cities and communities in Cumberland County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Fayetteville | 11 | Soft | 12 sites within 10 miles |
| Hope Mills | 11 | Soft | 10 sites within 10 miles |
| Spring Lake | 8 | Soft | 7 sites within 10 miles |
| Eastover | 12 | Soft | 7 sites within 10 miles |
| Stedman | 27 | Soft | 8 sites within 10 miles |
| Vander (CDP) | 12 | Soft | 8 sites within 10 miles |
| Wade | 23 | Soft | 4 sites within 10 miles |
| Falcon | 20 | Soft | 6 sites within 10 miles |
| Godwin | 20 | Soft | 4 sites within 10 miles |
| Linden | 20 | Soft | 4 sites within 10 miles |
Water quality in Cumberland County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Fayetteville | Fayetteville Public Works Comm | 9 found (PFOA 11 / PFOS 21.8 ppt) | 0 lead · 31,568 unknown | None |
| Hope Mills | Cardinal Care of Hope Mills | Not tested | 0 lead · 0 unknown | None |
| Spring Lake | Town of Spring Lake | 8 found (PFOA 9.4 / PFOS 15.6 ppt) | 0 lead · 4,689 unknown | 1 (1 open) |
| Eastover | Eastover Sanitary District | 8 found (PFOA 10.1 / PFOS 14 ppt) | 0 lead · 0 unknown | None |
| Stedman | Town of Stedman | Not tested | 0 lead · 353 unknown | None |
| Wade | Town of Wade | Not tested | 0 lead · 0 unknown | None |
| Falcon | Falcon Water System | Not tested | 0 lead · 313 unknown | None |
| Godwin | Town of Godwin | Not tested | 0 lead · 0 unknown | 1 |
| Linden | Town of Linden | Not tested | 0 lead · 0 unknown | 1 |
Neighboring counties
- Harnett County31 mg/L
- Hoke County9 mg/L
- Sampson County32 mg/L
- Robeson County18 mg/L
- Lee County100 mg/L
- Bladen County22 mg/L
North Carolina
The statewide median is 33 mg/L (soft) from 1,749 sites.
North Carolina hardness map →Hardness scale
What to read next
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.