Water hardness in Lebanon County, PA
Water in Lebanon County is very hard, with a median of 186 mg/L (10.9 grains per gallon) across 48 monitoring sites.
Lebanon County water at a glance
- HardnessVery hard (186 mg/L, 10.9 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 186 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 10.9 gpg (10.4 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Lebanon County
Prefilled with Lebanon County's measured local hardness of 186 mg/L (10.9 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Lebanon County on the Pennsylvania map
Cities and communities in Lebanon County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Lebanon | 222 | Very hard | 42 sites within 10 miles |
| Palmyra | 140 | Hard | 52 sites within 10 miles |
| Annville (CDP) | 140 | Hard | 50 sites within 10 miles |
| Cornwall | 174 | Hard | 44 sites within 10 miles |
| Campbelltown (CDP) | 146 | Hard | 49 sites within 10 miles |
| Myerstown | 108 | Moderately hard | 33 sites within 10 miles |
| Pleasant Hill (CDP) | 187 | Very hard | 47 sites within 10 miles |
| Sand Hill (CDP) | 205 | Very hard | 41 sites within 10 miles |
| Newmanstown (CDP) | 71 | Moderately hard | 28 sites within 10 miles |
| Lebanon South (CDP) | 196 | Very hard | 42 sites within 10 miles |
| Cleona | 186 | Very hard | 48 sites within 10 miles |
| Avon (CDP) | 210 | Very hard | 42 sites within 10 miles |
| Jonestown | 138 | Hard | 44 sites within 10 miles |
| Richland | 77 | Moderately hard | 31 sites within 10 miles |
| Fredericksburg (CDP) | 92 | Moderately hard | 50 sites within 10 miles |
| Hebron (CDP) | 210 | Very hard | 42 sites within 10 miles |
| Schaefferstown (CDP) | 137 | Hard | 32 sites within 10 miles |
| Quentin (CDP) | 161 | Hard | 45 sites within 10 miles |
| Timber Hills (CDP) | 161 | Hard | 43 sites within 10 miles |
| Mount Gretna Heights (CDP) | 161 | Hard | 43 sites within 10 miles |
| Mount Gretna | 161 | Hard | 43 sites within 10 miles |
| Fort Indiantown Gap (CDP) | 102 | Moderately hard | 48 sites within 10 miles |
| West Myerstown (CDP) | 113 | Moderately hard | 32 sites within 10 miles |
Water quality in Lebanon County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Lebanon | Lebanon Water Auth | None detected | 121 lead · 10,342 unknown | 1 |
| Cornwall | Borough of Cornwall | Not tested | 4 lead · 506 unknown | None |
| Pleasant Hill | Village of Pleasant Hill | Not tested | 0 lead · 0 unknown | 1 |
| Richland | Richland TWP Water Authority | None detected | 0 lead · 0 unknown | None |
| Fort Indiantown Gap | Fort Indiantown Gap | Not tested | 0 lead · 0 unknown | None |
Neighboring counties
- Dauphin County76 mg/L
- Lancaster County179 mg/L
- Schuylkill County82 mg/L
- Berks County67 mg/L
- York County102 mg/L
- Northumberland County94 mg/L
Pennsylvania
The statewide median is 82 mg/L (moderately hard) from 4,757 sites.
Pennsylvania hardness map →Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.