Water hardness in Jefferson County, PA
Water in Jefferson County is moderately hard, with a median of 68 mg/L (4 grains per gallon) across 18 monitoring sites.
Jefferson County water at a glance
- HardnessModerately hard (68 mg/L, 4 gpg, local measurements). Some scale; descale kettles and flush the water heater.Water heater care →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 68 mg/L means at home
- Water softener: Most homes do not need a softener. You may notice light spotting on glass and fixtures.
- Dishwasher: set the water hardness to about 4 gpg (3.8 °dH), which is a low-to-medium hardness setting.
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Jefferson County
Prefilled with Jefferson County's measured local hardness of 68 mg/L (4 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Jefferson County on the Pennsylvania map
Cities and communities in Jefferson County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Punxsutawney | 88 | Moderately hard | 8 sites within 10 miles |
| Brookville | 94 | Moderately hard | 14 sites within 10 miles |
| Reynoldsville | 91 | Moderately hard | 16 sites within 10 miles |
| Brockway | 54 | Soft | 8 sites within 10 miles |
| Sykesville | 92 | Moderately hard | 23 sites within 10 miles |
| Falls Creek | 90 | Moderately hard | 23 sites within 10 miles |
| Big Run | 128 | Hard | 10 sites within 10 miles |
| Summerville | 133 | Hard | 15 sites within 10 miles |
| Crenshaw (CDP) | 54 | Soft | 11 sites within 10 miles |
| Corsica | 106 | Moderately hard | 17 sites within 10 miles |
| Timblin | 104 | Moderately hard | 3 sites within 10 miles |
| Worthville | 130 | Hard | 3 sites within 10 miles |
Water quality in Jefferson County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Sykesville | Sykesville Borough | Not tested | 0 lead · 547 unknown | 2 |
Neighboring counties
- Clarion County99 mg/L
- Elk County39 mg/L
- Forest County39 mg/L
- Clearfield County148 mg/L
- Armstrong County102 mg/L
- Indiana County84 mg/L
Pennsylvania
The statewide median is 82 mg/L (moderately hard) from 4,757 sites.
Pennsylvania hardness map →Hardness scale
What to read next
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.