Water hardness in Armstrong County, PA
Water in Armstrong County is moderately hard, with a median of 102 mg/L (6 grains per gallon) across 20 monitoring sites.
Armstrong County water at a glance
- HardnessModerately hard (102 mg/L, 6 gpg, local measurements). Some scale; descale kettles and flush the water heater.Water heater care →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 102 mg/L means at home
- Water softener: Most homes do not need a softener. You may notice light spotting on glass and fixtures.
- Dishwasher: set the water hardness to about 6 gpg (5.7 °dH), which is a low-to-medium hardness setting.
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Armstrong County
Prefilled with Armstrong County's measured local hardness of 102 mg/L (6 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Armstrong County on the Pennsylvania map
Cities and communities in Armstrong County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Kittanning | 86 | Moderately hard | 9 sites within 10 miles |
| Ford City | 114 | Moderately hard | 7 sites within 10 miles |
| Leechburg | 118 | Moderately hard | 22 sites within 10 miles |
| Orchard Hills (CDP) | 118 | Moderately hard | 22 sites within 10 miles |
| Freeport | 114 | Moderately hard | 20 sites within 10 miles |
| Apollo | 121 | Hard | 23 sites within 10 miles |
| West Hills (CDP) | 86 | Moderately hard | 10 sites within 10 miles |
| North Apollo | 118 | Moderately hard | 22 sites within 10 miles |
| Lenape Heights (CDP) | 114 | Moderately hard | 7 sites within 10 miles |
| West Kittanning | 86 | Moderately hard | 9 sites within 10 miles |
| Rural Valley | 69 | Moderately hard | 8 sites within 10 miles |
| Pleasant View (CDP) | 114 | Moderately hard | 21 sites within 10 miles |
| Parker | 65 | Moderately hard | 16 sites within 10 miles |
| Worthington | 70 | Moderately hard | 5 sites within 10 miles |
| Dayton | 64 | Moderately hard | 9 sites within 10 miles |
| South Bethlehem | 126 | Hard | 10 sites within 10 miles |
| North Vandergrift (CDP) | 114 | Moderately hard | 21 sites within 10 miles |
| Manorville | 86 | Moderately hard | 10 sites within 10 miles |
| Ford Cliff | 114 | Moderately hard | 7 sites within 10 miles |
| Applewold | 86 | Moderately hard | 10 sites within 10 miles |
| Templeton (CDP) | 101 | Moderately hard | 13 sites within 10 miles |
| Elderton | 114 | Moderately hard | 7 sites within 10 miles |
| Kiskimere (CDP) | 114 | Moderately hard | 21 sites within 10 miles |
| Atwood | 56 | Soft | 9 sites within 10 miles |
| Clinton (CDP) | 103 | Moderately hard | 16 sites within 10 miles |
| Distant (CDP) | 109 | Moderately hard | 10 sites within 10 miles |
| Schenley (CDP) | 118 | Moderately hard | 20 sites within 10 miles |
| Spring Church (CDP) | 128 | Hard | 14 sites within 10 miles |
| Yatesboro (CDP) | 67 | Moderately hard | 9 sites within 10 miles |
Water quality in Armstrong County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Ford City | Ford City Muni Water Works | Not tested | 35 lead · 1,579 unknown | 1 |
| Rural Valley | Rural Valley Water Works | Not tested | 0 lead · 3 unknown | 1 |
| Dayton | Dayton Muni Water Dept | Not tested | 0 lead · 0 unknown | None |
| Templeton | Templeton Water | Not tested | 0 lead · 0 unknown | None |
Neighboring counties
- Indiana County84 mg/L
- Butler County84 mg/L
- Clarion County99 mg/L
- Jefferson County68 mg/L
- Westmoreland County100 mg/L
- Allegheny County248 mg/L
Pennsylvania
The statewide median is 82 mg/L (moderately hard) from 4,757 sites.
Pennsylvania hardness map →Hardness scale
What to read next
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.