Water hardness in Austin County, TX
Water in Austin County is hard, with a median of 168 mg/L (9.8 grains per gallon) across 1 monitoring site.
Austin County water at a glance
- HardnessHard (168 mg/L, 9.8 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 168 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 9.8 gpg (9.4 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Austin County
Prefilled with Austin County's measured local hardness of 168 mg/L (9.8 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Austin County on the Texas map
Cities and communities in Austin County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Sealy | 168 | Hard | county median |
| Bellville | 168 | Hard | county median |
| Wallis | 168 | Hard | county median |
| San Felipe | 168 | Hard | county median |
| Brazos Country | 168 | Hard | county median |
| Industry | 168 | Hard | county median |
| South Frydek | 168 | Hard | county median |
| New Ulm (CDP) | 168 | Hard | county median |
Water quality in Austin County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Sealy | City of Sealy | None detected | 0 lead · 0 unknown | 1 |
| Bellville | City of Bellville | None detected | 0 lead · 1,603 unknown | 1 |
| Wallis | City of Wallis | Not tested | 44 lead · 370 unknown | None |
| Brazos Country | City of Brazos Country | Not tested | 0 lead · 0 unknown | None |
Neighboring counties
- Waller County94 mg/L
- Washington County141 mg/L
- Colorado County43 mg/L
- Fayette County243 mg/L
- Fort Bend County156 mg/L
- Burleson County8 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.