Water hardness in Lochearn, MD
Water in Lochearn is hard, with a median of 138 mg/L (8.1 grains per gallon) across 61 monitoring sites within 10 miles.
Lochearn tap water at a glance
- HardnessHard (138 mg/L, 8.1 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 138 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 8.1 gpg (7.7 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Lochearn
Prefilled with Lochearn's measured local hardness of 138 mg/L (8.1 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Lochearn tap water
Lochearn is served by more than one water system. These systems supply ZIP codes in Lochearn and were tested for PFAS ("forever chemicals") in EPA's nationwide UCMR 5 study. Check your water bill to see which one is yours.
Water systems serving Lochearn
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| City of Baltimore serves over 10,000 people | PFPeA | — | Aug 2024 – May 2025 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Lochearn
Lochearn is served by more than one water system. Their service line inventories, as reported to EPA:
Water systems serving Lochearn
| Water system | Service lines | Total |
|---|---|---|
| City of Baltimore | 47 lead · 385 galvanized · 335,694 unknown | 336,126 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Lochearn drinking water violations
Lochearn is served by more than one water system. Health-based violations recorded by EPA since 2016:
Water systems serving Lochearn
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| City of Baltimore | 4 | 7 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Lochearn
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| GWYNNS FALLS AT VILLA NOVA, MD USGS Maryland Water Science Center | Stream | 0.4 mi | 111 mg/L | 1 | 2000 |
| SCOTTS LEVEL BRANCH AT VILLA NOVA, MD USGS Maryland Water Science Center | Stream | 1.3 mi | 123 mg/L | 1 | 2000 |
| BA Eb 292 USGS Maryland Water Science Center | Well | 2.8 mi | 81 mg/L | 1 | 2000 |
| BA Fb 81 USGS Maryland Water Science Center | Well | 4.2 mi | 746 mg/L | 1 | 2000 |
| GWYNNS FALLS TRIBUTARY AT MCDONOGH, MD USGS Maryland Water Science Center | Stream | 4.3 mi | 46 mg/L | 1 | 2000 |
| BA Ec 205 USGS Maryland Water Science Center | Well | 4.5 mi | 237 mg/L | 1 | 2001 |
Water hardness in towns near Lochearn
| Town | Distance | Median | Class |
|---|---|---|---|
| Milford Mill | 2 mi | 78 mg/L | Moderately hard |
| Woodlawn | 3 mi | 103 mg/L | Moderately hard |
| Pikesville | 3 mi | 237 mg/L | Very hard |
| Randallstown | 4 mi | 70 mg/L | Moderately hard |
| Owings Mills | 5 mi | 76 mg/L | Moderately hard |
| Catonsville | 6 mi | 71 mg/L | Moderately hard |
| Towson | 7 mi | 244 mg/L | Very hard |
| Baltimore | 7 mi | 266 mg/L | Very hard |
| Mays Chapel | 7 mi | 216 mg/L | Very hard |
| Arbutus | 8 mi | 55 mg/L | Soft |
Baltimore County
Lochearn is in Baltimore County, where the median is 154 mg/L (hard) across 198 sites.
See all of Baltimore County →Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.