Water hardness in Baltimore, MD

Water in Baltimore is very hard, with a median of 266 mg/L (15.5 grains per gallon) across 101 monitoring sites within 10 miles.

375% harder than the Maryland median (56 mg/L) 5th hardest of 121 Maryland towns Population 565,239
266mg/L
15.5 grains per gallon
Very hard

Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in Baltimore can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.

Baltimore tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 266 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 15.5 gpg (14.9 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites101
Lab samples351
Sample years2000–2006
Middle 50% of sites211–289 mg/L
Groundwater (wells, springs)268 mg/L · 82 sites
Surface water (rivers, lakes)262 mg/L · 19 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Baltimore

Prefilled with Baltimore's measured local hardness of 266 mg/L (15.6 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Baltimore tap water

City of Baltimore is the main public water system for Baltimore. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 12 samples taken Aug 2024 – May 2025. 1 PFAS was detected.

ChemicalHighest resultDetected inEPA limit
PFPeA
perfluoropentanoic acid
3 ppt 1 of 12 samples —

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Baltimore

City of Baltimore reported 336,126 service lines (the pipes connecting homes to the water main) in its inventory. 47 are lead and 385 are galvanized lines that must be replaced, and 335,694 are still of unknown material.

47lead (<1%)
385galvanized requiring replacement
335,694unknown material (100%)
0not lead (0%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask City of Baltimore whether your address is on its list.

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Baltimore drinking water violations

EPA records show 4 health-based violations for City of Baltimore since 2016, all since resolved or closed. The most recent began in Apr 2026. It also had 7 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Contaminant or ruleTypeViolationsMost recentStatus
Total trihalomethanes (TTHM)
byproducts formed when chlorine reacts with natural matter in water · what it means
highest measured 83 UG/L; limit 0.080 mg/L
Contaminant above legal limit 2 Apr 2026 Resolved/closed
Coliform bacteria / E. coli (Revised Total Coliform Rule)
bacteria that signal possible contamination of the system · what it means
Contaminant above legal limit 1 Sep 2022 Resolved/closed
Haloacetic acids (HAA5)
byproducts of chlorine disinfection · what it means
highest measured 63 UG/L; limit 0.060 mg/L
Contaminant above legal limit 1 Jan 2016 Resolved/closed

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Baltimore

SiteTypeDistanceMedianSamplesYears
3S2E- 5
USGS Maryland Water Science Center
Well 2.5 mi402 mg/L12003
GWYNNS FALLS AT WASHINGTON BLVD AT BALTIMORE, MD
USGS Maryland Water Science Center
Stream 2.9 mi130 mg/L12000
PATAPSCO RIVER TRIBUTARY AT HALETHORPE, MD
USGS Maryland Water Science Center
Stream 5.5 mi145 mg/L12000
BA Ff 92
USGS Maryland Water Science Center
Well 6.6 mi124 mg/L12003
UNNAMED TRIB TO PATAPSCO RIVER NEAR PATAPSCO, MD
USGS Maryland Water Science Center
Stream 6.7 mi95 mg/L12000
BA Ee 230
USGS Maryland Water Science Center
Well 7.3 mi202 mg/L12004

Water hardness in towns near Baltimore

TownDistanceMedianClass
Brooklyn Park6 mi 73 mg/LModerately hard
Rosedale6 mi 265 mg/LVery hard
Arbutus6 mi 55 mg/LSoft
Dundalk7 mi 138 mg/LHard
Towson7 mi 244 mg/LVery hard
Parkville7 mi 258 mg/LVery hard
Overlea7 mi 262 mg/LVery hard
Linthicum7 mi 39 mg/LSoft
Lochearn7 mi 138 mg/LHard
Woodlawn7 mi 103 mg/LModerately hard

Baltimore city

Baltimore is in Baltimore city, where the median is 266 mg/L (very hard) across 2 sites.

See all of Baltimore city →

Maryland

The statewide median is 56 mg/L (soft) from 1,412 sites.

Maryland hardness map →

Baltimore, MD water: common questions

Do I need a water softener in Baltimore?

Very likely. Water measured around Baltimore is 15.5 gpg (266 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 27,000 grains.Size it for your household →

Who supplies Baltimore's drinking water?

The main public water system serving Baltimore in EPA records is City of Baltimore. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Baltimore?

It depends on what you want to remove. In Baltimore, EPA testing found PFPeA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system reports 47 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced; the system had 4 health-based violations since 2016, for TTHM and the Revised Total Coliform Rule and more; the utility's annual report says what was done about them. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next