Water hardness in Troy, NY

Water in Troy is hard, with a median of 123 mg/L (7.2 grains per gallon) across 25 monitoring sites within 10 miles.

60% harder than the New York median (77 mg/L) 59th hardest of 193 New York towns Population 50,607
123mg/L
7.2 grains per gallon
Hard

Troy tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 123 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 7.2 gpg (6.9 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites25
Lab samples350
Sample years2000–2021
Middle 50% of sites56–227 mg/L
Groundwater (wells, springs)131 mg/L · 9 sites
Surface water (rivers, lakes)122 mg/L · 16 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Troy

Prefilled with Troy's measured local hardness of 123 mg/L (7.2 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Troy tap water

Troy City PWS is the main public water system for Troy. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken May 2024 – Feb 2025. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Troy

Water systemPFAS detectedHighest PFOA / PFOSTested
North Greenbush Consolidated District
serves over 10,000 people
None detected — Jan 2024 – Oct 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Troy

Troy City PWS reported 12,637 service lines (the pipes connecting homes to the water main) in its inventory. 1,564 are lead and 77 are galvanized lines that must be replaced, and 7,777 are still of unknown material.

1,564lead (12%)
77galvanized requiring replacement
7,777unknown material (62%)
3,219not lead (25%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Troy City PWS whether your address is on its list.

Other water systems serving parts of Troy

Water systemService linesTotal
North Greenbush Consolidated District0 lead · 0 galvanized · 0 unknown3,780

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Troy drinking water violations

EPA records show 3 health-based violations for Troy City PWS since 2016, all since resolved or closed. The most recent began in Oct 2021. It also had 5 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Contaminant or ruleTypeViolationsMost recentStatus
Lead and Copper Rule
corrosion control, testing and notification requirements for lead
Treatment requirement not met 1 Oct 2021 Resolved/closed
Total trihalomethanes (TTHM)
byproducts formed when chlorine reacts with natural matter in water · what it means
highest measured 81.63 UG/L; limit 0.080 mg/L
Contaminant above legal limit 2 Jan 2018 Resolved/closed

Other water systems serving parts of Troy

Water systemHealth-based violationsMonitoring/reporting
North Greenbush Consolidated District13

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Troy

SiteTypeDistanceMedianSamplesYears
WYNANTSKILL CREEK IN TROY
New York State Dec Division Of Water (State)
River/Stream 2.5 mi120 mg/L102008
RE4784
USGS New York Water Science Center
Well 2.8 mi131 mg/L12017
MOHAWK RIVER In Cohoes
NYS Dept. of EnCon, Division of Water
River/Stream 3.1 mi113 mg/L402001–2007
Mohawk River
New York State Dec Division Of Water (State)
River/Stream 3.1 mi114 mg/L182008–2012
WYNANTS KILL AT RUSSELL AVE AT WYNANTSKILL NY
USGS New York Water Science Center
Stream 3.3 mi171 mg/L92016
HUDSON RIVER (Upper) In Waterford
NYS Dept. of EnCon, Division of Water
River/Stream 3.7 mi56 mg/L422001–2007

Water hardness in towns near Troy

TownDistanceMedianClass
Watervliet2 mi 123 mg/LHard
Cohoes3 mi 164 mg/LHard
Albany8 mi 148 mg/LHard
Schenectady14 mi 207 mg/LVery hard
Rotterdam15 mi 219 mg/LVery hard
Saratoga Springs24 mi 114 mg/LModerately hard
Amsterdam30 mi 301 mg/LVery hard
Glens Falls40 mi 125 mg/LHard
Gloversville40 mi 203 mg/LVery hard
Kingston58 mi 152 mg/LHard

Rensselaer County

Troy is in Rensselaer County, where the median is 115 mg/L (moderately hard) across 24 sites.

See all of Rensselaer County →

New York

The statewide median is 77 mg/L (moderately hard) from 2,847 sites.

New York hardness map →

Troy, NY water: common questions

Do I need a water softener in Troy?

Many homes here use one. Water measured around Troy is 7.2 gpg (123 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 13,000 grains.Size it for your household →

Who supplies Troy's drinking water?

The main public water system serving Troy in EPA records is Troy City PWS. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Troy?

It depends on what you want to remove. In Troy, the system reports 1,564 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced; the system had 3 health-based violations since 2016, for the Lead and Copper Rule and TTHM; the utility's annual report says what was done about them. On the other hand, no PFAS found in EPA testing. A water softener is not a filter.Check your own service line →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next