Water hardness in Glens Falls, NY
Water in Glens Falls is hard, with a median of 125 mg/L (7.3 grains per gallon) across 11 monitoring sites within 10 miles.
Glens Falls tap water at a glance
- HardnessHard (125 mg/L, 7.3 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- PFAS4 found; the highest PFOA result was above EPA's 4 ppt limit (a single result is not a violation).Filters that remove PFAS →
- Lead pipesThe water system reported 11 lead service lines.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 125 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 7.3 gpg (7 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Glens Falls
Prefilled with Glens Falls's measured local hardness of 125 mg/L (7.3 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Glens Falls tap water
Glens Falls City is the main public water system for Glens Falls. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Jan 2023 – Oct 2023. 4 PFAS were detected. The highest PFOA result was above EPA's drinking water limit (4 ppt).
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFBA perfluorobutanoic acid | 5.5 ppt | 1 of 4 samples | — |
| PFOA perfluorooctanoic acid | 4.7 ppt | 1 of 4 samples | 4 ppt |
| PFPeA perfluoropentanoic acid | 4.5 ppt | 1 of 4 samples | — |
| PFHxA perfluorohexanoic acid | 3.8 ppt | 1 of 4 samples | — |
Other water systems serving parts of Glens Falls
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Queensbury Water District serves over 10,000 people | None detected | — | Jan 2023 – Oct 2023 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Glens Falls
Glens Falls City reported 5,226 service lines (the pipes connecting homes to the water main) in its inventory. 11 are lead and 182 are galvanized lines that must be replaced, and 2,090 are still of unknown material.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Glens Falls City whether your address is on its list.
Other water systems serving parts of Glens Falls
| Water system | Service lines | Total |
|---|---|---|
| Queensbury Water District | 0 lead · 1 galvanized · 1,740 unknown | 9,366 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Glens Falls drinking water violations
EPA records show no health-based violations for Glens Falls City since 2016. It also had 2 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Glens Falls
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Queensbury Water District | None | 0 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Glens Falls
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| WR1671 USGS New York Water Science Center | Well | 1.3 mi | 193 mg/L | 1 | 2009 |
| SA2742 USGS New York Water Science Center | Well | 4 mi | 125 mg/L | 1 | 2007 |
| WR 956 USGS New York Water Science Center | Well | 4.3 mi | 176 mg/L | 1 | 2004 |
| SA5675, NY USGS New York Water Science Center | Well | 7.8 mi | 90 mg/L | 1 | 2022 |
| WR2631 USGS New York Water Science Center | Well | 7.8 mi | 61 mg/L | 1 | 2017 |
| SA2631 USGS New York Water Science Center | Well | 7.8 mi | 105 mg/L | 1 | 2006 |
Water hardness in towns near Glens Falls
| Town | Distance | Median | Class |
|---|---|---|---|
| Saratoga Springs | 18 mi | 114 mg/L | Moderately hard |
| Cohoes | 37 mi | 164 mg/L | Hard |
| Amsterdam | 38 mi | 301 mg/L | Very hard |
| Schenectady | 38 mi | 207 mg/L | Very hard |
| Gloversville | 40 mi | 203 mg/L | Very hard |
| Troy | 40 mi | 123 mg/L | Hard |
| Rotterdam | 40 mi | 219 mg/L | Very hard |
| Watervliet | 41 mi | 123 mg/L | Hard |
| Albany | 45 mi | 148 mg/L | Hard |
| Utica | 81 mi | 272 mg/L | Very hard |
Warren County
Glens Falls is in Warren County, where the median is 30 mg/L (soft) across 54 sites.
See all of Warren County →New York
The statewide median is 77 mg/L (moderately hard) from 2,847 sites.
New York hardness map →Glens Falls, NY water: common questions
Do I need a water softener in Glens Falls?
Many homes here use one. Water measured around Glens Falls is 7.3 gpg (125 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 13,000 grains.Size it for your household →
Who supplies Glens Falls's drinking water?
The main public water system serving Glens Falls in EPA records is Glens Falls City. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Glens Falls?
It depends on what you want to remove. In Glens Falls, EPA testing found PFBA, PFOA and PFPeA and 1 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system reports 11 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 4 PFAS in Glens Falls's main water system.
- How to tell if your home has a lead pipe11 lead service lines are reported here.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.