Water hardness in Albany, NY

Water in Albany is hard, with a median of 148 mg/L (8.7 grains per gallon) across 28 monitoring sites within 10 miles.

92% harder than the New York median (77 mg/L) 49th hardest of 193 New York towns Population 101,228
148mg/L
8.7 grains per gallon
Hard

Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in Albany can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.

Albany tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 148 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 8.7 gpg (8.3 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites28
Lab samples347
Sample years2000–2021
Middle 50% of sites86–244 mg/L
Groundwater (wells, springs)227 mg/L · 11 sites
Surface water (rivers, lakes)123 mg/L · 17 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Albany

Prefilled with Albany's measured local hardness of 148 mg/L (8.7 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Albany tap water

Albany City is the main public water system for Albany. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Sep 2023 – Jun 2024. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Albany

Water systemPFAS detectedHighest PFOA / PFOSTested
Bethlehem WD No 1
serves over 10,000 people
None detected — Jan 2023 – Nov 2023
Latham Water District
serves over 10,000 people
None detected — Jan 2023 – Oct 2023

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Albany

Albany City reported 24,680 service lines (the pipes connecting homes to the water main) in its inventory. 2,199 are lead and 46 are galvanized lines that must be replaced, and 19,108 are still of unknown material.

2,199lead (9%)
46galvanized requiring replacement
19,108unknown material (77%)
3,327not lead (13%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Albany City whether your address is on its list.

Other water systems serving parts of Albany

Water systemService linesTotal
Bethlehem WD No 12 lead · 128 galvanized · 5,327 unknown11,953
Latham Water District6 lead · 34 galvanized · 2,922 unknown26,058

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Albany drinking water violations

EPA records show no health-based violations for Albany City since 2016. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Albany

Water systemHealth-based violationsMonitoring/reporting
Bethlehem WD No 170
Latham Water DistrictNone0

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Albany

SiteTypeDistanceMedianSamplesYears
NORMANSKILL CREEK
New York State Dec Division Of Water (State)
River/Stream 2.2 mi169 mg/L102008
QA Samples
New York State Dec Division Of Water (State)
Other-Surface Water 2.7 mi11 mg/L982012
PATROON CREEK AT ALBANY NY
USGS New York Water Science Center
Stream 2.7 mi298 mg/L92016
HUDSON RIVER (Lower) In Glenmont
NYS Dept. of EnCon, Division of Water
River/Stream 5.2 mi83 mg/L232001–2004
A1070
USGS New York Water Science Center
Well 5.7 mi128 mg/L12006
A 227
USGS New York Water Science Center
Well 5.9 mi423 mg/L12013

Water hardness in towns near Albany

TownDistanceMedianClass
Watervliet6 mi 123 mg/LHard
Troy8 mi 123 mg/LHard
Cohoes9 mi 164 mg/LHard
Rotterdam11 mi 219 mg/LVery hard
Schenectady11 mi 207 mg/LVery hard
Amsterdam28 mi 301 mg/LVery hard
Saratoga Springs28 mi 114 mg/LModerately hard
Gloversville38 mi 203 mg/LVery hard
Glens Falls45 mi 125 mg/LHard
Kingston52 mi 152 mg/LHard

Albany County

Albany is in Albany County, where the median is 194 mg/L (very hard) across 23 sites.

See all of Albany County →

New York

The statewide median is 77 mg/L (moderately hard) from 2,847 sites.

New York hardness map →

Albany, NY water: common questions

Do I need a water softener in Albany?

Many homes here use one. Water measured around Albany is 8.7 gpg (148 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 15,000 grains.Size it for your household →

Who supplies Albany's drinking water?

The main public water system serving Albany in EPA records is Albany City. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Albany?

It depends on what you want to remove. In Albany, the system reports 2,199 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no PFAS found in EPA testing and no health-based violations since 2016. A water softener is not a filter.Check your own service line →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next