Water hardness in Park Ridge, IL

Water in Park Ridge is very hard, with a median of 255 mg/L (14.9 grains per gallon) across 17 monitoring sites within 10 miles.

13% softer than the Illinois median (293 mg/L) 154th hardest of 225 Illinois towns Population 37,897
255mg/L
14.9 grains per gallon
Very hard

Park Ridge tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 255 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 14.9 gpg (14.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites17
Lab samples142
Sample years2000–2014
Middle 50% of sites213–286 mg/L
Groundwater (wells, springs)597 mg/L · 1 sites
Surface water (rivers, lakes)246 mg/L · 16 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Park Ridge

Prefilled with Park Ridge's measured local hardness of 255 mg/L (14.9 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Park Ridge tap water

The City of Park Ridge water system is the main public water system for Park Ridge. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Jul 2023 – Nov 2023. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Park Ridge

Water systemPFAS detectedHighest PFOA / PFOSTested
Des Plaines
serves over 10,000 people
None detected — May 2024 – Feb 2025
Aqua Illinois-North Maine Utilities
serves over 10,000 people
None detected — May 2023 – Feb 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Park Ridge

The City of Park Ridge water system reported 12,647 service lines (the pipes connecting homes to the water main) in its inventory. 2,594 are lead and 0 are galvanized lines that must be replaced, and 7,191 are still of unknown material.

2,594lead (21%)
0galvanized requiring replacement
7,191unknown material (57%)
2,862not lead (23%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask the City of Park Ridge water system whether your address is on its list.

Other water systems serving parts of Park Ridge

Water systemService linesTotal
Des Plaines1,607 lead · 1,824 galvanized · 6,835 unknown16,665
Aqua Illinois-North Maine Utilities36 lead · 208 galvanized · 2,973 unknown4,829

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Park Ridge drinking water violations

EPA records show no health-based violations for the City of Park Ridge water system since 2016. It also had 6 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Park Ridge

Water systemHealth-based violationsMonitoring/reporting
Des PlainesNone5
Aqua Illinois-North Maine UtilitiesNone1

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Park Ridge

SiteTypeDistanceMedianSamplesYears
WILLOW CREEK AT DES PLAINES R RD NR ROSEMONT, IL
USGS Illinois Water Science Center
Stream 1.7 mi270 mg/L12000
North Branch Chicago River
illinois epa (State)
River/Stream 2.5 mi280 mg/L242000–2002
Des Plaines River
illinois epa (State)
River/Stream 4.1 mi286 mg/L242000–2002
Des Plaines River
illinois epa (State)
River/Stream 4.3 mi312 mg/L232000–2002
Middle Fork North Branch Chicago River
illinois epa (State)
River/Stream 4.6 mi255 mg/L32001
NORTH BRANCH CHICAGO RIVER AT GLENVIEW, IL
USGS Illinois Water Science Center
Stream 5.3 mi207 mg/L12004

Water hardness in towns near Park Ridge

TownDistanceMedianClass
Niles2 mi 226 mg/LVery hard
Des Plaines3 mi 255 mg/LVery hard
Norridge3 mi 270 mg/LVery hard
Morton Grove3 mi 226 mg/LVery hard
Schiller Park4 mi 275 mg/LVery hard
Glenview5 mi 244 mg/LVery hard
Franklin Park6 mi 276 mg/LVery hard
Skokie6 mi 231 mg/LVery hard
Lincolnwood6 mi 222 mg/LVery hard
Mount Prospect6 mi 262 mg/LVery hard

Cook County

Park Ridge is in Cook County, where the median is 252 mg/L (very hard) across 63 sites.

See all of Cook County →

Illinois

The statewide median is 293 mg/L (very hard) from 1,100 sites.

Illinois hardness map →

Park Ridge, IL water: common questions

Do I need a water softener in Park Ridge?

Very likely. Water measured around Park Ridge is 14.9 gpg (255 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 26,000 grains.Size it for your household →

Who supplies Park Ridge's drinking water?

The main public water system serving Park Ridge in EPA records is Park Ridge. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Park Ridge?

It depends on what you want to remove. In Park Ridge, the system reports 2,594 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no PFAS found in EPA testing and no health-based violations since 2016. A water softener is not a filter.Check your own service line →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next