Water hardness in Chicago Heights, IL
Water in Chicago Heights is very hard, with a median of 278 mg/L (16.3 grains per gallon) across 14 monitoring sites within 10 miles.
Chicago Heights tap water at a glance
- HardnessVery hard (278 mg/L, 16.3 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
- Lead pipesThe water system reported 2,674 lead service lines.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 278 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 16.3 gpg (15.6 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Chicago Heights
Prefilled with Chicago Heights's measured local hardness of 278 mg/L (16.3 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Chicago Heights tap water
The City of Chicago Heights water system is the main public water system for Chicago Heights. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Sep 2024 – Jun 2025. No PFAS were found at or above EPA's minimum reporting levels.
Other water systems serving parts of Chicago Heights
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Homewood serves over 10,000 people | PFOA | 4.3 / ND ppt | Sep 2023 – Jun 2024 |
| SAUK serves over 10,000 people | 4:2 FTS | — | May 2025 – Nov 2025 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Chicago Heights
The City of Chicago Heights water system reported 9,709 service lines (the pipes connecting homes to the water main) in its inventory. 2,674 are lead and 113 are galvanized lines that must be replaced, and 6,608 are still of unknown material.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask the City of Chicago Heights water system whether your address is on its list.
Other water systems serving parts of Chicago Heights
| Water system | Service lines | Total |
|---|---|---|
| Homewood | 3,753 lead · 6 galvanized · 593 unknown | 6,840 |
| SAUK | 0 lead · 0 galvanized · 0 unknown | 3,349 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Chicago Heights drinking water violations
EPA records show no health-based violations for the City of Chicago Heights water system since 2016. It also had 7 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Chicago Heights
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Homewood | None | 5 |
| SAUK | None | 164 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Chicago Heights
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| Thorn Creek illinois epa (State) | River/Stream | 0.6 mi | 572 mg/L | 3 | 2001 |
| Butterfield Creek illinois epa (State) | River/Stream | 2.2 mi | 182 mg/L | 3 | 2001 |
| Deer Creek illinois epa (State) | River/Stream | 2.7 mi | 280 mg/L | 3 | 2001 |
| DEER CREEK NEAR GLENWOOD, IL USGS Illinois Water Science Center | Stream | 2.7 mi | 239 mg/L | 1 | 2000 |
| BUTTERFIELD C AT COUNTRY CLUB RD NR FLOSSMOOR, IL USGS Illinois Water Science Center | Stream | 2.7 mi | 180 mg/L | 1 | 2000 |
| Thorn Creek illinois epa (State) | River/Stream | 3.6 mi | 370 mg/L | 3 | 2001 |
Water hardness in towns near Chicago Heights
| Town | Distance | Median | Class |
|---|---|---|---|
| Park Forest | 3 mi | 282 mg/L | Very hard |
| Homewood | 4 mi | 239 mg/L | Very hard |
| Hazel Crest | 5 mi | 236 mg/L | Very hard |
| Matteson | 6 mi | 239 mg/L | Very hard |
| Lansing | 6 mi | 252 mg/L | Very hard |
| Country Club Hills | 6 mi | 232 mg/L | Very hard |
| Richton Park | 6 mi | 282 mg/L | Very hard |
| South Holland | 6 mi | 232 mg/L | Very hard |
| Harvey | 7 mi | 232 mg/L | Very hard |
| Markham | 7 mi | 232 mg/L | Very hard |
Cook County
Chicago Heights is in Cook County, where the median is 252 mg/L (very hard) across 63 sites.
See all of Cook County →Chicago Heights, IL water: common questions
Do I need a water softener in Chicago Heights?
Very likely. Water measured around Chicago Heights is 16.3 gpg (278 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 29,000 grains.Size it for your household →
Who supplies Chicago Heights's drinking water?
The main public water system serving Chicago Heights in EPA records is Chicago Heights. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Chicago Heights?
It depends on what you want to remove. In Chicago Heights, the system reports 2,674 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no PFAS found in EPA testing and no health-based violations since 2016. A water softener is not a filter.Check your own service line →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- How to tell if your home has a lead pipe2,674 lead service lines are reported here.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.