Water hardness in Flower Mound, TX

Water in Flower Mound is hard, with a median of 130 mg/L (7.6 grains per gallon) across 33 monitoring sites within 10 miles.

33% softer than the Texas median (194 mg/L) 183rd hardest of 251 Texas towns Population 79,445
130mg/L
7.6 grains per gallon
Hard

Flower Mound tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 130 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 7.6 gpg (7.3 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites33
Lab samples2,465
Sample years2000–2023
Middle 50% of sites123–140 mg/L
Surface water (rivers, lakes)130 mg/L · 33 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Flower Mound

Prefilled with Flower Mound's measured local hardness of 130 mg/L (7.6 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Flower Mound tap water

Town of Flower Mound is the main public water system for Flower Mound. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 12 samples taken Apr 2023 – Aug 2024. 6 PFAS were detected. The highest PFOA result was above EPA's drinking water limit (4 ppt).

ChemicalHighest resultDetected inEPA limit
PFHxA
perfluorohexanoic acid
12.9 ppt 11 of 12 samples —
PFPeA
perfluoropentanoic acid
11.6 ppt 12 of 12 samples —
PFBA
perfluorobutanoic acid
11.5 ppt 11 of 12 samples —
PFBS
perfluorobutane sulfonic acid
5.3 ppt 11 of 12 samples —
PFOA
perfluorooctanoic acid
4.4 ppt 1 of 12 samples 4 ppt
PFHpA
perfluoroheptanoic acid
3.1 ppt 1 of 12 samples —

Other water systems serving parts of Flower Mound

Water systemPFAS detectedHighest PFOA / PFOSTested
City of Lewisville
serves over 10,000 people
PFBA, PFHxA, PFPeA +1 more — May 2024 – May 2025
City of Denton
serves over 10,000 people
PFBA, PFHxA, PFPeA +1 more — Jan 2023 – Oct 2023
City of Highland Village
serves over 10,000 people
PFBA, PFHxA, PFPeA +2 more — May 2023 – Jul 2024
Denton County FWSD 7 Lantana
serves over 10,000 people
PFBA, PFPeA, PFHxA +1 more — Apr 2024 – Jan 2025
City of Fort Worth
serves over 10,000 people
PFHxS, PFHxA, PFBA +4 more 8.3 / 7.3 ppt Jan 2023 – Jan 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Flower Mound

Town of Flower Mound reported 25,300 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.

0lead (0%)
0galvanized requiring replacement
0unknown material (0%)
25,300not lead (100%)

Other water systems serving parts of Flower Mound

Water systemService linesTotal
City of Lewisville0 lead · 0 galvanized · 10,459 unknown29,784
City of Denton44 lead · 1,276 galvanized · 1,763 unknown43,474
City of Highland Village0 lead · 0 galvanized · 1,178 unknown5,525
Denton County FWSD 70 lead · 0 galvanized · 0 unknown4,269
City of Fort Worth0 lead · 32,590 galvanized · 0 unknown300,778

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Flower Mound drinking water violations

EPA records show no health-based violations for Town of Flower Mound since 2016. It also had 6 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Flower Mound

Water systemHealth-based violationsMonitoring/reporting
City of LewisvilleNone1
City of DentonNone1
City of Highland VillageNone2
Denton County FWSD 7 LantanaNone6
City of Fort Worth11

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Flower Mound

SiteTypeDistanceMedianSamplesYears
Grapevine Lk Site SB nr Grapevine, TX
USGS Texas Water Science Center
Lake, Reservoir, Impoundment 2.1 mi140 mg/L1402016–2023
Grapevine Lk at Twin Coves Pk nr Grapevine, TX
USGS Texas Water Science Center
Lake, Reservoir, Impoundment 2.7 mi137 mg/L1402016–2023
Grapevine Lk at Murrell Pk W nr Grapevine, TX
USGS Texas Water Science Center
Lake, Reservoir, Impoundment 3.1 mi148 mg/L22018
Grapevine Lk Site DC nr Grapevine, TX
USGS Texas Water Science Center
Lake, Reservoir, Impoundment 3.2 mi145 mg/L1402016–2023
Grapevine Lk Site BC nr Grapevine, TX
USGS Texas Water Science Center
Lake, Reservoir, Impoundment 3.4 mi128 mg/L242000–2003
GRAPEVINE LAKE SITE BC
Texas Commission on Environmental Quality
Reservoir 3.4 mi130 mg/L122002–2003

Water hardness in towns near Flower Mound

TownDistanceMedianClass
Trophy Club5 mi 138 mg/LHard
Highland Village5 mi 128 mg/LHard
Southlake6 mi 138 mg/LHard
Roanoke7 mi 140 mg/LHard
Grapevine7 mi 147 mg/LHard
Corinth8 mi 116 mg/LModerately hard
Lewisville8 mi 128 mg/LHard
Coppell9 mi 141 mg/LHard
Keller10 mi 138 mg/LHard
Colleyville10 mi 140 mg/LHard

Denton County

Flower Mound is in Denton County, where the median is 126 mg/L (hard) across 44 sites.

See all of Denton County →

Texas

The statewide median is 194 mg/L (very hard) from 2,271 sites.

Texas hardness map →

Flower Mound, TX water: common questions

Do I need a water softener in Flower Mound?

Many homes here use one. Water measured around Flower Mound is 7.6 gpg (130 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 14,000 grains.Size it for your household →

Who supplies Flower Mound's drinking water?

The main public water system serving Flower Mound in EPA records is Town of Flower Mound. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Flower Mound?

It depends on what you want to remove. In Flower Mound, EPA testing found PFHxA, PFPeA and PFBA and 3 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next