Water hardness in Colleyville, TX

Water in Colleyville is hard, with a median of 140 mg/L (8.2 grains per gallon) across 22 monitoring sites within 10 miles.

28% softer than the Texas median (194 mg/L) 176th hardest of 251 Texas towns Population 25,736
140mg/L
8.2 grains per gallon
Hard

Colleyville tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 140 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 8.2 gpg (7.8 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites22
Lab samples1,410
Sample years2000–2023
Middle 50% of sites131–190 mg/L
Surface water (rivers, lakes)140 mg/L · 22 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Colleyville

Prefilled with Colleyville's measured local hardness of 140 mg/L (8.2 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Colleyville tap water

City of Colleyville is the main public water system for Colleyville. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Aug 2024 – Jun 2025. 6 PFAS were detected. The highest PFOS result was above EPA's drinking water limit (4 ppt).

ChemicalHighest resultDetected inEPA limit
PFBA
perfluorobutanoic acid
8.4 ppt 3 of 4 samples —
PFOS
perfluorooctane sulfonic acid
5.4 ppt 2 of 4 samples 4 ppt
PFBS
perfluorobutane sulfonic acid
4.2 ppt 4 of 4 samples —
PFHxA
perfluorohexanoic acid
3.4 ppt 4 of 4 samples —
PFPeA
perfluoropentanoic acid
3.3 ppt 4 of 4 samples —
PFHxS
perfluorohexane sulfonic acid
3.2 ppt 2 of 4 samples 10 ppt*

Other water systems serving parts of Colleyville

Water systemPFAS detectedHighest PFOA / PFOSTested
City of Bedford
serves over 10,000 people
PFBA, PFBS, PFPeA +2 more ND / 4.3 ppt Jun 2024 – Mar 2025
City of Hurst
serves over 10,000 people
PFBA, PFPeA, PFHxA — May 2023 – Jul 2024
City of Southlake
serves over 10,000 people
PFHxS, PFBA, PFHxA +3 more ND / 4.1 ppt Nov 2023 – Aug 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Colleyville

City of Colleyville reported 10,614 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.

0lead (0%)
0galvanized requiring replacement
0unknown material (0%)
10,614not lead (100%)

Other water systems serving parts of Colleyville

Water systemService linesTotal
City of Bedford0 lead · 0 galvanized · 0 unknown15,302
City of Hurst2 lead · 681 galvanized · 1,302 unknown12,161
City of Southlake0 lead · 0 galvanized · 0 unknown10,590

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Colleyville drinking water violations

EPA records show no health-based violations for City of Colleyville since 2016.

Other water systems serving parts of Colleyville

Water systemHealth-based violationsMonitoring/reporting
City of BedfordNone0
City of HurstNone0
City of Southlake11

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Colleyville

SiteTypeDistanceMedianSamplesYears
Grapevine Lk at Oak Grove Pk W nr Grapevine, TX
USGS Texas Water Science Center
Lake, Reservoir, Impoundment 6.3 mi128 mg/L462011–2023
Grapevine Lk at Oak Grove Pk E nr Grapevine, TX
USGS Texas Water Science Center
Lake, Reservoir, Impoundment 6.7 mi138 mg/L1402016–2023
GRAPEVINE LAKE AT MARINA
Texas Commission on Environmental Quality
Reservoir 6.9 mi128 mg/L292000–2003
GRAPEVINE LAKE AT DWU INTAKE
Texas Commission on Environmental Quality
Reservoir 7 mi134 mg/L292000–2003
Grapevine Lk Site CC nr Grapevine, TX
USGS Texas Water Science Center
Lake, Reservoir, Impoundment 7 mi140 mg/L1402016–2023
Grapevine Lk Site DQ nr Grapevine, TX
USGS Texas Water Science Center
Lake, Reservoir, Impoundment 7.3 mi140 mg/L1402016–2023

Water hardness in towns near Colleyville

TownDistanceMedianClass
Bedford3 mi 190 mg/LVery hard
Hurst4 mi 189 mg/LVery hard
Southlake4 mi 138 mg/LHard
North Richland Hills5 mi 168 mg/LHard
Euless5 mi 184 mg/LVery hard
Keller5 mi 138 mg/LHard
Grapevine5 mi 147 mg/LHard
Watauga6 mi 168 mg/LHard
Trophy Club7 mi 138 mg/LHard
Haltom City9 mi 110 mg/LModerately hard

Tarrant County

Colleyville is in Tarrant County, where the median is 355 mg/L (very hard) across 59 sites.

See all of Tarrant County →

Texas

The statewide median is 194 mg/L (very hard) from 2,271 sites.

Texas hardness map →

Colleyville, TX water: common questions

Do I need a water softener in Colleyville?

Many homes here use one. Water measured around Colleyville is 8.2 gpg (140 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 15,000 grains.Size it for your household →

Who supplies Colleyville's drinking water?

The main public water system serving Colleyville in EPA records is City of Colleyville. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Colleyville?

It depends on what you want to remove. In Colleyville, EPA testing found PFBA, PFOS and PFBS and 3 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next