Water hardness in Wilmington, NC

Water in Wilmington is very hard, with a median of 230 mg/L (13.4 grains per gallon) across 89 monitoring sites within 10 miles.

597% harder than the North Carolina median (33 mg/L) 3rd hardest of 92 North Carolina towns Population 122,698
230mg/L
13.4 grains per gallon
Very hard

Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in Wilmington can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.

Wilmington tap water at a glance

  • HardnessVery hard (230 mg/L, 13.4 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • PFAS1 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
  • Lead pipesNo lead service lines reported.Details →
  • ViolationsNo health-based violations since 2016.EPA record →

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 230 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 13.4 gpg (12.9 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites89
Lab samples137
Sample years2000–2022
Middle 50% of sites152–302 mg/L
Groundwater (wells, springs)231 mg/L · 85 sites
Surface water (rivers, lakes)34 mg/L · 4 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Wilmington

Prefilled with Wilmington's measured local hardness of 230 mg/L (13.5 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Wilmington tap water

Cfpua-Wilmington is the main public water system for Wilmington. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 6 samples taken Dec 2023 – Sep 2024. 1 PFAS was detected.

ChemicalHighest resultDetected inEPA limit
PFPeA
perfluoropentanoic acid
4.4 ppt 1 of 6 samples —

Other water systems serving parts of Wilmington

Water systemPFAS detectedHighest PFOA / PFOSTested
the Cape Master System
serves over 10,000 people
HFPO-DA, PFBS — Jan 2025 – Jul 2025
Pender County Utilities
serves over 10,000 people
PFPeA, PFBS, PFBA +1 more — Aug 2023 – May 2024
Brunswick County Water System
serves over 10,000 people
PFOS, PFPeA, PFHxA +6 more 7.7 / 12.4 ppt Jan 2023 – Oct 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Wilmington

Cfpua-Wilmington reported 72,785 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.

0lead (0%)
0galvanized requiring replacement
0unknown material (0%)
72,785not lead (100%)

Other water systems serving parts of Wilmington

Water systemService linesTotal
the Cape Master System0 lead · 0 galvanized · 55 unknown4,691
Pender County Utilities0 lead · 0 galvanized · 0 unknown11,300
Brunswick County Water System0 lead · 0 galvanized · 0 unknown59,042

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Wilmington drinking water violations

EPA records show no health-based violations for Cfpua-Wilmington since 2016. It also had 4 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Wilmington

Water systemHealth-based violationsMonitoring/reporting
the Cape Master System63
Pender County Utilities169
Brunswick County Water System19

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Wilmington

SiteTypeDistanceMedianSamplesYears
NH-003 GW NITRATE SITE 13
USGS North Carolina Water Science Center
Well 0.6 mi50 mg/L22000
NH-869 NR WILMINGTON, NC CASTLE HAYNE
USGS North Carolina Water Science Center
Well 0.7 mi38 mg/L12012
NH-895 AT WILMINGTON, NC SURFICIAL
USGS North Carolina Water Science Center
Well 1.6 mi44 mg/L12017
NH-989 MAS 4 NR WILMINGTON, NC CASTLE HAYNE
USGS North Carolina Water Science Center
Well 1.6 mi162 mg/L42003–2017
NH-1005 NR WILMINGTON, NC SURFICIAL
USGS North Carolina Water Science Center
Well 1.7 mi21 mg/L12017
NH-853 NR WILMINGTON, NC CASTLE HAYNE
USGS North Carolina Water Science Center
Well 1.7 mi206 mg/L12012

Water hardness in towns near Wilmington

TownDistanceMedianClass
Murraysville6 mi 248 mg/LVery hard
Leland9 mi 41 mg/LSoft
Jacksonville46 mi 95 mg/LModerately hard
Piney Green51 mi 155 mg/LHard
Lumberton71 mi 16 mg/LSoft
Havelock74 mi 262 mg/LVery hard
Kinston75 mi 34 mg/LSoft
New Bern77 mi 178 mg/LHard
Hope Mills81 mi 11 mg/LSoft
Goldsboro81 mi 30 mg/LSoft

New Hanover County

Wilmington is in New Hanover County, where the median is 239 mg/L (very hard) across 102 sites.

See all of New Hanover County →

North Carolina

The statewide median is 33 mg/L (soft) from 1,749 sites.

North Carolina hardness map →

Wilmington, NC water: common questions

Do I need a water softener in Wilmington?

Very likely. Water measured around Wilmington is 13.4 gpg (230 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 24,000 grains.Size it for your household →

Who supplies Wilmington's drinking water?

The main public water system serving Wilmington in EPA records is Cfpua-Wilmington. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Wilmington?

It depends on what you want to remove. In Wilmington, EPA testing found PFPeA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next