Water hardness in Wyoming County, NY
Water in Wyoming County is very hard, with a median of 220 mg/L (12.9 grains per gallon) across 21 monitoring sites.
Wyoming County water at a glance
- HardnessVery hard (220 mg/L, 12.9 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 220 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 12.9 gpg (12.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Wyoming County
Prefilled with Wyoming County's measured local hardness of 220 mg/L (12.9 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Wyoming County on the New York map
Cities and communities in Wyoming County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Warsaw | 227 | Very hard | 8 sites within 10 miles |
| Perry | 288 | Very hard | 10 sites within 10 miles |
| Arcade | 186 | Very hard | 10 sites within 10 miles |
| Castile | 221 | Very hard | 10 sites within 10 miles |
| Silver Springs | 212 | Very hard | 8 sites within 10 miles |
| Strykersville (CDP) | 225 | Very hard | 11 sites within 10 miles |
| Bliss (CDP) | 205 | Very hard | 13 sites within 10 miles |
| Wyoming | 304 | Very hard | 10 sites within 10 miles |
| Pike (CDP) | 199 | Very hard | 14 sites within 10 miles |
| Gainesville | 212 | Very hard | 8 sites within 10 miles |
Water quality in Wyoming County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Warsaw | Warsaw Village | None detected | 179 lead · 408 unknown | 1 |
| Perry | Perry Village | None detected | 0 lead · 958 unknown | None |
| Arcade | Arcade Village | Not tested | 0 lead · 0 unknown | None |
| Castile | Castile Village | Not tested | 0 lead · 32 unknown | None |
| Silver Springs | Silver Springs Village | Not tested | 0 lead · 57 unknown | None |
| Bliss | Bliss Water Supply | Not tested | 0 lead · 0 unknown | None |
| Wyoming | Wyoming Village | Not tested | 0 lead · 0 unknown | None |
| Pike | Pike Town | Not tested | 0 lead · 0 unknown | 2 |
Neighboring counties
- Genesee County322 mg/L
- Livingston County268 mg/L
- Erie County204 mg/L
- Allegany County118 mg/L
- Cattaraugus County132 mg/L
- Orleans County333 mg/L
New York
The statewide median is 77 mg/L (moderately hard) from 2,847 sites.
New York hardness map →Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.