Water hardness in Montgomery County, NY
Water in Montgomery County is very hard, with a median of 334 mg/L (19.5 grains per gallon) across 19 monitoring sites.
Montgomery County water at a glance
- HardnessVery hard (334 mg/L, 19.5 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 334 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 19.5 gpg (18.7 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Montgomery County
Prefilled with Montgomery County's measured local hardness of 334 mg/L (19.5 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Montgomery County on the New York map
Cities and communities in Montgomery County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Amsterdam | 301 | Very hard | 15 sites within 10 miles |
| Canajoharie | 366 | Very hard | 16 sites within 10 miles |
| Fort Plain | 369 | Very hard | 13 sites within 10 miles |
| St. Johnsville | 348 | Very hard | 15 sites within 10 miles |
| Hagaman | 257 | Very hard | 14 sites within 10 miles |
| Tribes Hill (CDP) | 137 | Hard | 11 sites within 10 miles |
| Palatine Bridge | 362 | Very hard | 17 sites within 10 miles |
| Fultonville | 198 | Very hard | 14 sites within 10 miles |
| Fonda | 203 | Very hard | 13 sites within 10 miles |
| Nelliston | 362 | Very hard | 15 sites within 10 miles |
| Fort Johnson | 223 | Very hard | 14 sites within 10 miles |
| Ames | 366 | Very hard | 16 sites within 10 miles |
Water quality in Montgomery County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Amsterdam | Amsterdam (C) | None detected | 230 lead · 4,431 unknown | 1 |
| St. Johnsville | ST. Johnsville Village Water Works | Not tested | 15 lead · 23 unknown | None |
| Fultonville | Fultonville Village PWS | Not tested | 0 lead · 304 unknown | None |
Neighboring counties
- Fulton County37 mg/L
- Schenectady County216 mg/L
- Schoharie County120 mg/L
- Albany County194 mg/L
- Saratoga County114 mg/L
- Otsego County105 mg/L
New York
The statewide median is 77 mg/L (moderately hard) from 2,847 sites.
New York hardness map →Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.