Water hardness in Grimes, IA

Water in Grimes is very hard, with a median of 302 mg/L (17.6 grains per gallon) across 8 monitoring sites within 10 miles.

8% softer than the Iowa median (330 mg/L) 22nd hardest of 42 Iowa towns Population 16,362
302mg/L
17.6 grains per gallon
Very hard

Grimes tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 302 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 17.6 gpg (16.9 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites8
Lab samples214
Sample years2000–2005
Middle 50% of sites300–322 mg/L
Groundwater (wells, springs)430 mg/L · 2 sites
Surface water (rivers, lakes)300 mg/L · 6 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Grimes

Prefilled with Grimes's measured local hardness of 302 mg/L (17.7 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Grimes tap water

Grimes Water Supply is the main public water system for Grimes. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 2 samples taken May 2024 – Aug 2025. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Grimes

Water systemPFAS detectedHighest PFOA / PFOSTested
Johnston Municipal Water Supply
serves over 10,000 people
None detected — Jan 2025 – Oct 2025
Urbandale Water Utility
serves over 10,000 people
None detected — Aug 2023 – May 2024
Warren Water District
serves over 10,000 people
None detected — Dec 2023 – Sep 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Grimes

Grimes Water Supply reported 6,016 service lines (the pipes connecting homes to the water main) in its inventory. 0 are lead and 7 are galvanized lines that must be replaced.

0lead (0%)
7galvanized requiring replacement
0unknown material (0%)
6,009not lead (100%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Grimes Water Supply whether your address is on its list.

Other water systems serving parts of Grimes

Water systemService linesTotal
Johnston Municipal Water Supply0 lead · 0 galvanized · 0 unknown5,506
Urbandale Water Utility0 lead · 0 galvanized · 0 unknown17,723
Warren Water District0 lead · 0 galvanized · 103 unknown8,644

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Grimes drinking water violations

EPA records show no health-based violations for Grimes Water Supply since 2016. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Grimes

Water systemHealth-based violationsMonitoring/reporting
Johnston Municipal Water SupplyNone0
Urbandale Water UtilityNone0
Warren Water DistrictNone1

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Grimes

SiteTypeDistanceMedianSamplesYears
Saylorville Reservoir - Surface Depth
Des Moines River - Corp of Engineers (IOWA)
Lake 6.5 mi297 mg/L322001–2002
Saylorville Reservoir - Bottom Depth
Des Moines River - Corp of Engineers (IOWA)
Lake 6.5 mi300 mg/L302001–2002
Saylorville Reservoir - Bottom Depth
Des Moines River - Corp of Engineers (IOWA)
Lake 6.5 mi300 mg/L302001–2002
Saylorville Reservoir - Surface Depth
Des Moines River - Corp of Engineers (IOWA)
Lake 6.5 mi297 mg/L322001–2002
Station #5, Des Moines River at 66th. St.
Des Moines River - Corp of Engineers (IOWA)
River/Stream 6.9 mi302 mg/L442000–2002
Station #5, Des Moines River at 66th. St.
Des Moines River - Corp of Engineers (IOWA)
River/Stream 6.9 mi302 mg/L442000–2002

Water hardness in towns near Grimes

TownDistanceMedianClass
Urbandale3 mi 302 mg/LVery hard
Johnston4 mi 300 mg/LVery hard
Clive4 mi 300 mg/LVery hard
Waukee7 mi 379 mg/LVery hard
West Des Moines9 mi 379 mg/LVery hard
Ankeny11 mi 299 mg/LVery hard
Des Moines12 mi 301 mg/LVery hard
Norwalk15 mi 300 mg/LVery hard
Pleasant Hill16 mi 286 mg/LVery hard
Altoona17 mi 293 mg/LVery hard

Polk County

Grimes is in Polk County, where the median is 299 mg/L (very hard) across 22 sites.

See all of Polk County →

Iowa

The statewide median is 330 mg/L (very hard) from 789 sites.

Iowa hardness map →

Grimes, IA water: common questions

Do I need a water softener in Grimes?

Very likely. Water measured around Grimes is 17.6 gpg (302 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 31,000 grains.Size it for your household →

Who supplies Grimes's drinking water?

The main public water system serving Grimes in EPA records is Grimes Water Supply. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Grimes?

Not for anything in EPA's records: no PFAS found in EPA testing, no lead service lines reported and no health-based violations since 2016. People here who use a filter usually do it for taste, such as chlorine.Chlorine taste in tap water →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next