Water hardness in Cedar Rapids, IA

Water in Cedar Rapids is very hard, with a median of 268 mg/L (15.7 grains per gallon) across 45 monitoring sites within 10 miles.

19% softer than the Iowa median (330 mg/L) 32nd hardest of 42 Iowa towns Population 135,958
268mg/L
15.7 grains per gallon
Very hard

Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in Cedar Rapids can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.

Cedar Rapids tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 268 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 15.7 gpg (15 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites45
Lab samples810
Sample years2000–2023
Middle 50% of sites254–282 mg/L
Groundwater (wells, springs)269 mg/L · 41 sites
Surface water (rivers, lakes)251 mg/L · 4 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Cedar Rapids

Prefilled with Cedar Rapids's measured local hardness of 268 mg/L (15.7 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Cedar Rapids tap water

Cedar Rapids Water Department is the main public water system for Cedar Rapids. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 8 samples taken Jan 2023 – Oct 2023. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Cedar Rapids

Water systemPFAS detectedHighest PFOA / PFOSTested
Marion Municipal Water Dept
serves over 10,000 people
None detected — Jul 2024 – Jan 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Cedar Rapids

Cedar Rapids Water Department reported 54,425 service lines (the pipes connecting homes to the water main) in its inventory. 108 are lead and 2,387 are galvanized lines that must be replaced, and 4,949 are still of unknown material.

108lead (<1%)
2,387galvanized requiring replacement
4,949unknown material (9%)
46,981not lead (86%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Cedar Rapids Water Department whether your address is on its list.

Other water systems serving parts of Cedar Rapids

Water systemService linesTotal
Marion Municipal Water Dept69 lead · 101 galvanized · 1,025 unknown14,888

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Cedar Rapids drinking water violations

EPA records show no health-based violations for Cedar Rapids Water Department since 2016. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Cedar Rapids

Water systemHealth-based violationsMonitoring/reporting
Marion Municipal Water DeptNone0

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Cedar Rapids

SiteTypeDistanceMedianSamplesYears
083N07W29AAC 1996NAWQA City of Cedar Rapids
USGS Iowa Water Science Center
Well 0.6 mi607 mg/L12019
083N07W27BBC 1996NAWQA City of Cedar Rapids
USGS Iowa Water Science Center
Well 1.2 mi403 mg/L12019
083N07W17DACD 37819 1961Cedar Rapids East 3
USGS Iowa Water Science Center
Well: Multiple wells 2.2 mi290 mg/L12004
083N07W17DACC 1993USGS CRM-1
USGS Iowa Water Science Center
Well 2.2 mi254 mg/L132000–2003
083N07W07DDBD 1993USGS CRM-2
USGS Iowa Water Science Center
Well 3.2 mi261 mg/L132000–2003
2015USGS GPW4
USGS Iowa Water Science Center
Well: Collector or Ranney type well 3.3 mi252 mg/L32022–2023

Water hardness in towns near Cedar Rapids

TownDistanceMedianClass
Marion7 mi 268 mg/LVery hard
North Liberty16 mi 436 mg/LVery hard
Coralville19 mi 438 mg/LVery hard
Iowa City23 mi 448 mg/LVery hard
Muscatine49 mi 232 mg/LVery hard
Waterloo50 mi 251 mg/LVery hard
Cedar Falls55 mi 254 mg/LVery hard
Dubuque62 mi 200 mg/LVery hard
Davenport62 mi 225 mg/LVery hard
Marshalltown63 mi 362 mg/LVery hard

Linn County

Cedar Rapids is in Linn County, where the median is 268 mg/L (very hard) across 49 sites.

See all of Linn County →

Iowa

The statewide median is 330 mg/L (very hard) from 789 sites.

Iowa hardness map →

Cedar Rapids, IA water: common questions

Do I need a water softener in Cedar Rapids?

Very likely. Water measured around Cedar Rapids is 15.7 gpg (268 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 28,000 grains.Size it for your household →

Who supplies Cedar Rapids's drinking water?

The main public water system serving Cedar Rapids in EPA records is Cedar Rapids Water Department. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Cedar Rapids?

It depends on what you want to remove. In Cedar Rapids, the system reports 108 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no PFAS found in EPA testing and no health-based violations since 2016. A water softener is not a filter.Check your own service line →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next