Water hardness in Bloomington, IN

Water in Bloomington is very hard, with a median of 302 mg/L (17.6 grains per gallon) across Monroe County.

about the same as the Indiana median (303 mg/L) 40th hardest of 86 Indiana towns Population 78,840
302mg/L
17.6 grains per gallon
Very hard

There are not enough monitoring sites within 10 miles of Bloomington, so this page uses the Monroe County median.

Bloomington tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 302 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 17.6 gpg (16.9 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites1
Lab samples3
Sample years2001–2001
Middle 50% of sites302–302 mg/L
Surface water (rivers, lakes)302 mg/L · 1 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Bloomington

Prefilled with Bloomington's measured local hardness of 302 mg/L (17.7 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Bloomington tap water

City of Bloomington Utilities is the main public water system for Bloomington. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken May 2023 – Feb 2024. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Bloomington

Water systemPFAS detectedHighest PFOA / PFOSTested
Eastern Heights Utilities
serves over 10,000 people
None detected — Nov 2023 – Jun 2024
North Lawrence Water Authority
serves over 10,000 people
None detected — Sep 2024 – Jun 2025
Ellettsville Water Works
serves over 10,000 people
None detected — Apr 2024 – Jan 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Bloomington

City of Bloomington Utilities reported 26,414 service lines (the pipes connecting homes to the water main) in its inventory. 17 are lead and 50 are galvanized lines that must be replaced, and 9,630 are still of unknown material.

17lead (<1%)
50galvanized requiring replacement
9,630unknown material (36%)
16,717not lead (63%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask City of Bloomington Utilities whether your address is on its list.

Other water systems serving parts of Bloomington

Water systemService linesTotal
Eastern Heights Utilities0 lead · 0 galvanized · 0 unknown7,850
North Lawrence Water Authority1 lead · 0 galvanized · 2,488 unknown4,930
Ellettsville Water Works14 lead · 19 galvanized · 1,728 unknown5,706

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Bloomington drinking water violations

EPA records show 3 health-based violations for City of Bloomington Utilities since 2016, all since resolved or closed. The most recent began in Aug 2024. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Contaminant or ruleTypeViolationsMost recentStatus
Surface water treatment (filtration/turbidity)
filtration requirements that protect against microbes such as Cryptosporidium
Treatment requirement not met 1 Aug 2024 Resolved/closed
Lead and Copper Rule
corrosion control, testing and notification requirements for lead
Treatment requirement not met 2 Jan 2018 Resolved/closed

Other water systems serving parts of Bloomington

Water systemHealth-based violationsMonitoring/reporting
Eastern Heights UtilitiesNone0
North Lawrence Water Authority32
Ellettsville Water Works32

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Bloomington

SiteTypeDistanceMedianSamplesYears
WWL040-0005
Indiana STORET
River/Stream 7.8 mi302 mg/L32001

Water hardness in towns near Bloomington

TownDistanceMedianClass
Martinsville18 mi 297 mg/LVery hard
Bedford21 mi 224 mg/LVery hard
Bargersville31 mi 300 mg/LVery hard
Columbus33 mi 192 mg/LVery hard
Franklin34 mi 310 mg/LVery hard
Seymour37 mi 220 mg/LVery hard
Plainfield37 mi 269 mg/LVery hard
Greenwood38 mi 303 mg/LVery hard
Danville41 mi 309 mg/LVery hard
Avon42 mi 193 mg/LVery hard

Monroe County

Bloomington is in Monroe County, where the median is 302 mg/L (very hard) across 1 sites.

See all of Monroe County →

Indiana

The statewide median is 303 mg/L (very hard) from 1,344 sites.

Indiana hardness map →

Bloomington, IN water: common questions

Do I need a water softener in Bloomington?

Very likely. Water measured around Bloomington is 17.6 gpg (302 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 31,000 grains.Size it for your household →

Who supplies Bloomington's drinking water?

The main public water system serving Bloomington in EPA records is City of Bloomington Utilities. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Bloomington?

It depends on what you want to remove. In Bloomington, the system reports 17 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced; the system had 3 health-based violations since 2016, for the Interim Enhanced Surface Water Treatment Rule and the Lead and Copper Rule; the utility's annual report says what was done about them. On the other hand, no PFAS found in EPA testing. A water softener is not a filter.Check your own service line →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next