Water hardness in Lindsay, CA
Water in Lindsay is very hard, with a median of 215 mg/L (12.6 grains per gallon) across 17 monitoring sites within 10 miles.
Lindsay tap water at a glance
- HardnessVery hard (215 mg/L, 12.6 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFAS4 found; the highest PFOS and PFOA result was above EPA's 4 ppt limit (a single result is not a violation).Filters that remove PFAS →
- Lead pipesNo lead service lines reported.Details →
- Violations133 health-based violations since 2016.What they were →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 215 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 12.6 gpg (12 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Lindsay
Prefilled with Lindsay's measured local hardness of 215 mg/L (12.6 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Lindsay tap water
City of Lindsay is the main public water system for Lindsay. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 8 samples taken Mar 2025 – Dec 2025. 4 PFAS were detected. The highest PFOS and PFOA results were above EPA's drinking water limit (4 ppt).
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFOS perfluorooctane sulfonic acid | 12 ppt | 4 of 8 samples | 4 ppt |
| PFOA perfluorooctanoic acid | 9.2 ppt | 4 of 8 samples | 4 ppt |
| PFBS perfluorobutane sulfonic acid | 4 ppt | 2 of 8 samples | — |
| PFPeA perfluoropentanoic acid | 3.6 ppt | 2 of 8 samples | — |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Lindsay
City of Lindsay reported 3,140 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Lindsay drinking water violations
EPA records show 133 health-based violations for City of Lindsay since 2016, all since resolved or closed. The most recent began in Apr 2026.
| Contaminant or rule | Type | Violations | Most recent | Status |
|---|---|---|---|---|
| Haloacetic acids (HAA5) byproducts of chlorine disinfection · what it means highest measured 0.0938 MG/L; limit 0.060 mg/L | Contaminant above legal limit | 45 | Apr 2026 | Resolved/closed |
| Total trihalomethanes (TTHM) byproducts formed when chlorine reacts with natural matter in water · what it means highest measured 0.119 MG/L; limit 0.080 mg/L | Contaminant above legal limit | 84 | Apr 2026 | Resolved/closed |
| Surface water treatment (filtration/turbidity) filtration requirements that protect against microbes such as Cryptosporidium | Treatment requirement not met | 4 | Jun 2023 | Resolved/closed |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Lindsay
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| 020S026E12H001M USGS California Water Science Center | Well | 0.6 mi | 332 mg/L | 3 | 2005–2021 |
| 020S027E11D001M USGS California Water Science Center | Well | 3.7 mi | 1050 mg/L | 1 | 2014 |
| 019S026E23P002M USGS California Water Science Center | Well | 3.7 mi | 215 mg/L | 1 | 2014 |
| 020S026E26M001M USGS California Water Science Center | Well | 4 mi | 143 mg/L | 1 | 2015 |
| 020S027E14K001M USGS California Water Science Center | Well | 4.5 mi | 311 mg/L | 1 | 2014 |
| 020S026E21D001M USGS California Water Science Center | Well | 4.7 mi | 216 mg/L | 1 | 2014 |
Water hardness in towns near Lindsay
| Town | Distance | Median | Class |
|---|---|---|---|
| Exeter | 7 mi | 183 mg/L | Very hard |
| Farmersville | 9 mi | 122 mg/L | Hard |
| Porterville | 11 mi | 211 mg/L | Very hard |
| Tulare | 14 mi | 150 mg/L | Hard |
| Visalia | 15 mi | 116 mg/L | Moderately hard |
| Corcoran | 28 mi | 164 mg/L | Hard |
| Dinuba | 29 mi | 233 mg/L | Very hard |
| Delano | 32 mi | 114 mg/L | Moderately hard |
| Hanford | 32 mi | 59 mg/L | Soft |
| Reedley | 33 mi | 151 mg/L | Hard |
Tulare County
Lindsay is in Tulare County, where the median is 154 mg/L (hard) across 132 sites.
See all of Tulare County →Lindsay, CA water: common questions
Do I need a water softener in Lindsay?
Very likely. Water measured around Lindsay is 12.6 gpg (215 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 22,000 grains.Size it for your household →
Who supplies Lindsay's drinking water?
The main public water system serving Lindsay in EPA records is City of Lindsay. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Lindsay?
It depends on what you want to remove. In Lindsay, EPA testing found PFOS, PFOA and PFBS and 1 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system had 133 health-based violations since 2016, for Total Haloacetic Acids (HAA5) and TTHM and more; the utility's annual report says what was done about them. On the other hand, no lead service lines reported. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 4 PFAS in Lindsay's main water system.
- TTHM in drinking waterDisinfection byproducts appear in this system's violation record.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.