Tankless water heaters and hard water
Updated November 20, 2026 · Based on EPA and other public sources listed below · How we make our content
Short answer: hard water is harder on tankless water heaters than on tanks, because scale forms right in the small heat exchanger passages. In hard-water areas, descale about every six months (Rheem's guidance), keep the inlet filter clean, and consider softening or conditioning the water above about 7 grains per gallon (120 mg/L).
Why tankless heaters are sensitive to scale
A tank heater warms a large volume of water slowly, and most scale falls to the bottom of the tank. A tankless heater heats water as it flows through a compact heat exchanger at high intensity. Calcium carbonate forms on those hot surfaces and narrows the passages, which cuts flow, makes temperature control harder and can trigger shutdowns.
In the industry-funded Battelle laboratory study, tankless gas heaters fed very hard water (26 grains per gallon) stopped working because of scale after the equivalent of about 1.6 years of use, while units on softened water kept their rated efficiency. Real homes rarely have water that hard, but the direction is clear: the harder the water, the more maintenance a tankless unit needs.
Is your water hard enough to matter?
| City | Hardness | Class | Tankless upkeep |
|---|---|---|---|
| New York, NY | 31 mg/L · 1.8 gpg | Soft | Yearly service |
| Los Angeles, CA | 170 mg/L · 9.9 gpg | Hard | Descale ~every 6 months; consider softening |
| Chicago, IL | 135 mg/L · 7.9 gpg | Hard | Descale ~every 6 months; consider softening |
| Phoenix, AZ | 218 mg/L · 12.7 gpg | Very hard | Descale ~every 6 months; consider softening |
| Philadelphia, PA | 125 mg/L · 7.3 gpg | Hard | Descale ~every 6 months; consider softening |
| San Antonio, TX | 300 mg/L · 17.5 gpg | Very hard | Descale ~every 6 months; consider softening |
| San Diego, CA | 276 mg/L · 16.1 gpg | Very hard | Descale ~every 6 months; consider softening |
| Dallas, TX | 138 mg/L · 8.1 gpg | Hard | Descale ~every 6 months; consider softening |
| Jacksonville, FL | 246 mg/L · 14.4 gpg | Very hard | Descale ~every 6 months; consider softening |
| Austin, TX | 93 mg/L · 5.4 gpg | Moderately hard | Yearly descale |
| Fort Worth, TX | 128 mg/L · 7.5 gpg | Hard | Descale ~every 6 months; consider softening |
| Columbus, OH | 115 mg/L · 6.7 gpg | Moderately hard | Yearly descale |
| Charlotte, NC | 39 mg/L · 2.3 gpg | Soft | Yearly service |
| Indianapolis, IN | 292 mg/L · 17.1 gpg | Very hard | Descale ~every 6 months; consider softening |
| San Francisco, CA | 8 mg/L · 0.5 gpg | Soft | Yearly service |
| Seattle, WA | 28 mg/L · 1.6 gpg | Soft | Yearly service |
| Denver, CO | 105 mg/L · 6.1 gpg | Moderately hard | Yearly descale |
| Las Vegas, NV | 280 mg/L · 16.4 gpg | Very hard | Descale ~every 6 months; consider softening |
| Boston, MA | 16 mg/L · 0.9 gpg | Soft | Yearly service |
| Detroit, MI | 116 mg/L · 6.8 gpg | Moderately hard | Yearly descale |
| Louisville/Jefferson County metro government, KY | 135 mg/L · 7.9 gpg | Hard | Descale ~every 6 months; consider softening |
| Milwaukee, WI | 138 mg/L · 8.1 gpg | Hard | Descale ~every 6 months; consider softening |
| Kansas City, MO | 100 mg/L · 5.8 gpg | Moderately hard | Yearly descale |
| Aurora, CO | 136 mg/L · 7.9 gpg | Hard | Descale ~every 6 months; consider softening |
| New Orleans, LA | 101 mg/L · 5.9 gpg | Moderately hard | Yearly descale |
| Cleveland, OH | 117 mg/L · 6.8 gpg | Moderately hard | Yearly descale |
| Henderson, NV | 304 mg/L · 17.8 gpg | Very hard | Descale ~every 6 months; consider softening |
| Lubbock, TX | 192 mg/L · 11.2 gpg | Very hard | Descale ~every 6 months; consider softening |
| Paradise, NV | 280 mg/L · 16.4 gpg | Very hard | Descale ~every 6 months; consider softening |
| Sioux Falls, SD | 250 mg/L · 14.6 gpg | Very hard | Descale ~every 6 months; consider softening |
| Amarillo, TX | 238 mg/L · 13.9 gpg | Very hard | Descale ~every 6 months; consider softening |
| Oxnard, CA | 319 mg/L · 18.6 gpg | Very hard | Descale ~every 6 months; consider softening |
| Sunrise Manor, NV | 280 mg/L · 16.4 gpg | Very hard | Descale ~every 6 months; consider softening |
| Spring Valley, NV | 280 mg/L · 16.4 gpg | Very hard | Descale ~every 6 months; consider softening |
| Corona, CA | 146 mg/L · 8.5 gpg | Hard | Descale ~every 6 months; consider softening |
| Syracuse, NY | 127 mg/L · 7.4 gpg | Hard | Descale ~every 6 months; consider softening |
| Metairie, LA | 78 mg/L · 4.6 gpg | Moderately hard | Yearly descale |
| Warren, MI | 105 mg/L · 6.1 gpg | Moderately hard | Yearly descale |
| West Valley City, UT | 176 mg/L · 10.3 gpg | Hard | Descale ~every 6 months; consider softening |
| Simi Valley, CA | 140 mg/L · 8.2 gpg | Hard | Descale ~every 6 months; consider softening |
| Thousand Oaks, CA | 140 mg/L · 8.2 gpg | Hard | Descale ~every 6 months; consider softening |
| Vallejo, CA | 153 mg/L · 8.9 gpg | Hard | Descale ~every 6 months; consider softening |
| Concord, CA | 74 mg/L · 4.3 gpg | Moderately hard | Yearly descale |
| Independence, MO | 123 mg/L · 7.2 gpg | Hard | Descale ~every 6 months; consider softening |
| West Jordan, UT | 183 mg/L · 10.7 gpg | Very hard | Descale ~every 6 months; consider softening |
| Richmond, CA | 68 mg/L · 4 gpg | Moderately hard | Yearly descale |
| Carlsbad, CA | 230 mg/L · 13.4 gpg | Very hard | Descale ~every 6 months; consider softening |
| Santa Maria, CA | 315 mg/L · 18.4 gpg | Very hard | Descale ~every 6 months; consider softening |
| Enterprise, NV | 280 mg/L · 16.4 gpg | Very hard | Descale ~every 6 months; consider softening |
| Centennial, CO | 105 mg/L · 6.1 gpg | Moderately hard | Yearly descale |
| Dearborn, MI | 102 mg/L · 6 gpg | Moderately hard | Yearly descale |
| Yuma, AZ | 345 mg/L · 20.2 gpg | Very hard | Descale ~every 6 months; consider softening |
| Whitney, NV | 280 mg/L · 16.4 gpg | Very hard | Descale ~every 6 months; consider softening |
| Winchester, NV | 280 mg/L · 16.4 gpg | Very hard | Descale ~every 6 months; consider softening |
Tap water hardness as published by each city's water utility. For any other town, look it up on the map.
How to protect a tankless water heater
- Descale on schedule. About once a year in average water and about every six months in hard water. Most units have isolation valves with service ports for flushing with vinegar or an approved descaler.
- Clean the inlet water filter screen at each service.
- Don't set the temperature higher than you need. Scale forms faster at higher temperatures.
- Treat the water. A water softener removes the hardness. A scale-prevention conditioner (for example template-assisted crystallization) leaves the minerals in but may reduce scale; check that your heater's manufacturer accepts it. See salt-free vs salt-based.
- Check the warranty. Many manufacturers spell out water quality limits and maintenance requirements; scale damage may not be covered if they weren't followed.
Tank or tankless in a hard-water area?
Both need more care in hard water: tanks collect sediment and wear anode rods, tankless units need regular descaling. If you're choosing a new heater and your water is hard or very hard, budget for either a softener or a descaling routine with a tankless unit. For tank heaters, see hard water and your water heater.
Frequently asked questions
Is a tankless water heater a good idea with hard water?
It can be, but it needs more care. Tankless heat exchangers have narrow passages that scale can narrow or block, so in hard water plan to descale about every six months, or soften or treat the water.
How often should you descale a tankless water heater?
Rheem recommends flushing a tankless unit about once a year, and more often (about every six months) where water is hard.
How do I know my tankless heater needs descaling?
Common signs are lower hot water flow, temperature swings, longer waits for hot water, and service or error codes that point to scale. Many units display a maintenance reminder.
Can I descale a tankless water heater myself?
Many owners do it with a pump, hoses and vinegar or a manufacturer-approved descaler through the service valves. Rheem advises that tasks involving gas lines, burners or electrical parts are best left to a licensed professional.
Sources
- Rheem: How to keep tank and tankless water heaters running at peak performance
- Water Quality Association: Softened water benefits studies (Battelle, 2010)
- Contractor: Battelle finds water softeners aid energy efficiency and appliance life
- University of Nebraska–Lincoln Extension: Salt-free water 'softener' options (G2275)