Water hardness in Laramie County, WY
Water in Laramie County is hard, with a median of 145 mg/L (8.5 grains per gallon) across 41 monitoring sites.
Laramie County water at a glance
- HardnessHard (145 mg/L, 8.5 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 145 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 8.5 gpg (8.1 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Laramie County
Prefilled with Laramie County's measured local hardness of 145 mg/L (8.5 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Laramie County on the Wyoming map
Cities and communities in Laramie County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Cheyenne | 126 | Hard | 9 sites within 10 miles |
| Ranchettes (CDP) | 128 | Hard | 11 sites within 10 miles |
| South Greeley (CDP) | 128 | Hard | 7 sites within 10 miles |
| Fox Farm-College (CDP) | 127 | Hard | 8 sites within 10 miles |
| Warren AFB (CDP) | 129 | Hard | 8 sites within 10 miles |
| Pine Bluffs | 152 | Hard | 8 sites within 10 miles |
| Burns | 151 | Hard | 8 sites within 10 miles |
| Albin | 156 | Hard | 4 sites within 10 miles |
| Carpenter (CDP) | 192 | Very hard | 5 sites within 10 miles |
| Hillsdale (CDP) | 129 | Hard | 8 sites within 10 miles |
Water quality in Laramie County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Cheyenne | Cheyenne Board of Public Utilities | None detected | 82 lead · 28,173 unknown | None |
| Pine Bluffs | Town of Pine Bluffs | Not tested | 0 lead · 0 unknown | 6 |
| Burns | Burns Board of Public Utilities | Not tested | 0 lead · 16 unknown | None |
| Albin | Town of Albin | Not tested | Not reported | 3 (2 open) |
| Carpenter | Carpenter W&S District | Not tested | 0 lead · 69 unknown | 1 |
Neighboring counties
- Goshen County195 mg/L
- Platte County243 mg/L
- Albany County182 mg/L
- Carbon County226 mg/L
- Niobrara County178 mg/L
- Converse County226 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.