Water hardness in Campbell County, WY

Water in Campbell County is very hard, with a median of 510 mg/L (29.8 grains per gallon) across 47 monitoring sites.

166% harder than the Wyoming median (192 mg/L) 3rd hardest of 23 counties
510mg/L
29.8 grains per gallon
Very hard

Campbell County water at a glance

  • HardnessVery hard (510 mg/L, 29.8 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 510 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 29.8 gpg (28.6 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites47
Lab samples1,005
Sample years2000–2023
Middle 50% of sites130–887 mg/L
Groundwater (wells, springs)198 mg/L · 29 sites
Surface water (rivers, lakes)887 mg/L · 18 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Campbell County

Prefilled with Campbell County's measured local hardness of 510 mg/L (29.8 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Campbell County on the Wyoming map

Lincoln CountyPlatte CountyWashakie CountyPark CountyUinta CountyConverse CountyGoshen CountyTeton CountyNatrona CountyNiobrara CountySweetwater CountySublette CountyBig Horn CountyHot Springs CountyAlbany CountyFremont CountyCarbon CountyCrook CountyLaramie CountyJohnson CountySheridan CountyWeston County

Cities and communities in Campbell County

PlaceMedian mg/LClassBased on
Gillette 532 Very hard 8 sites within 10 miles
Wright 336 Very hard 4 sites within 10 miles
Sleepy Hollow (CDP) 543 Very hard 7 sites within 10 miles

Water quality in Campbell County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Gillette City of Gillette None detected 0 lead · 4,714 unknown None
Wright Wright Water & Sewer District Not tested 0 lead · 5 unknown None

Neighboring counties

Wyoming

The statewide median is 192 mg/L (very hard) from 810 sites.

Wyoming hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next