Water hardness in Wasatch County, UT

Water in Wasatch County is very hard, with a median of 187 mg/L (10.9 grains per gallon) across 166 monitoring sites.

27% softer than the Utah median (256 mg/L) 27th hardest of 29 counties
187mg/L
10.9 grains per gallon
Very hard

Wasatch County water at a glance

  • HardnessVery hard (187 mg/L, 10.9 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 187 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 10.9 gpg (10.5 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites166
Lab samples4,558
Sample years2000–2023
Middle 50% of sites130–250 mg/L
Groundwater (wells, springs)250 mg/L · 35 sites
Surface water (rivers, lakes)176 mg/L · 131 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Wasatch County

Prefilled with Wasatch County's measured local hardness of 187 mg/L (10.9 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Wasatch County on the Utah map

Duchesne CountyCache CountySanpete CountySummit CountySan Juan CountyRich CountyWashington CountyIron CountyJuab CountyCarbon CountyEmery CountyGrand CountyTooele CountyWayne CountyUintah CountyGarfield CountyKane CountyBox Elder CountyMillard CountyWeber CountyMorgan CountyDavis CountySalt Lake CountyBeaver CountyPiute CountyUtah CountySevier CountyDaggett County

Cities and communities in Wasatch County

PlaceMedian mg/LClassBased on
Heber 190 Very hard 89 sites within 10 miles
Park City 235 Very hard 100 sites within 10 miles
Midway 176 Hard 118 sites within 10 miles
Hideout 206 Very hard 117 sites within 10 miles
Daniel 198 Very hard 73 sites within 10 miles
Timber Lakes (CDP) 174 Hard 46 sites within 10 miles
Charleston 181 Very hard 101 sites within 10 miles
Wallsburg 200 Very hard 59 sites within 10 miles
Interlaken 176 Hard 119 sites within 10 miles
Independence 214 Very hard 38 sites within 10 miles

Water quality in Wasatch County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Heber Heber City Water System None detected 0 lead · 240 unknown None
Park City Park City Water System 5 found (PFOA 4.8 / PFOS 6.7 ppt) 0 lead · 0 unknown None
Midway Midway City Water System None detected 0 lead · 363 unknown None
Hideout Hideout Town Water System Not tested 0 lead · 0 unknown None
Daniel Daniel Municipal Water Not tested 0 lead · 185 unknown None
Wallsburg Wallsburg Town Water System Not tested 0 lead · 76 unknown None
Interlaken Interlaken Town Not tested 0 lead · 0 unknown 4

Neighboring counties

Utah

The statewide median is 256 mg/L (very hard) from 4,077 sites.

Utah hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next