Water hardness in Cache County, UT
Water in Cache County is very hard, with a median of 241 mg/L (14.1 grains per gallon) across 148 monitoring sites.
Cache County water at a glance
- HardnessVery hard (241 mg/L, 14.1 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 241 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 14.1 gpg (13.5 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Cache County
Prefilled with Cache County's measured local hardness of 241 mg/L (14.1 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Cache County on the Utah map
Cities and communities in Cache County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Logan | 285 | Very hard | 83 sites within 10 miles |
| Smithfield | 244 | Very hard | 71 sites within 10 miles |
| North Logan | 282 | Very hard | 78 sites within 10 miles |
| Hyrum | 272 | Very hard | 70 sites within 10 miles |
| Providence | 279 | Very hard | 77 sites within 10 miles |
| Nibley | 284 | Very hard | 73 sites within 10 miles |
| Hyde Park | 267 | Very hard | 81 sites within 10 miles |
| Wellsville | 289 | Very hard | 80 sites within 10 miles |
| Richmond | 212 | Very hard | 39 sites within 10 miles |
| Millville | 284 | Very hard | 72 sites within 10 miles |
| River Heights | 284 | Very hard | 79 sites within 10 miles |
| Lewiston | 220 | Very hard | 36 sites within 10 miles |
| Benson (CDP) | 285 | Very hard | 91 sites within 10 miles |
| Mendon | 291 | Very hard | 89 sites within 10 miles |
| Paradise | 265 | Very hard | 57 sites within 10 miles |
| Newton | 293 | Very hard | 50 sites within 10 miles |
| Clarkston | 304 | Very hard | 32 sites within 10 miles |
| Trenton | 286 | Very hard | 52 sites within 10 miles |
| Amalga | 266 | Very hard | 71 sites within 10 miles |
| Cove (CDP) | 200 | Very hard | 26 sites within 10 miles |
| Avon (CDP) | 219 | Very hard | 32 sites within 10 miles |
| Peter (CDP) | 293 | Very hard | 85 sites within 10 miles |
| Cornish | 287 | Very hard | 34 sites within 10 miles |
| Cache (CDP) | 293 | Very hard | 59 sites within 10 miles |
Water quality in Cache County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Logan | Logan City Water System | None detected | 0 lead · 0 unknown | None |
| Smithfield | Smithfield City | None detected | 0 lead · 0 unknown | None |
| North Logan | North Logan City | None detected | 0 lead · 0 unknown | 1 |
| Hyrum | Hyrum City | None detected | 0 lead · 1,435 unknown | None |
| Providence | Providence City Water System | None detected | 0 lead · 0 unknown | None |
| Nibley | Nibley City Water | None detected | 0 lead · 321 unknown | None |
| Hyde Park | Hyde Park City Water System | None detected | 0 lead · 716 unknown | None |
| Wellsville | Wellsville City Water System | None detected | 0 lead · 379 unknown | 3 |
| Richmond | Richmond City Water System | Not tested | 0 lead · 512 unknown | None |
| Millville | Millville City | Not tested | 0 lead · 0 unknown | None |
| River Heights | River Heights City | Not tested | 0 lead · 163 unknown | None |
| Lewiston | Lewiston City | Not tested | 0 lead · 0 unknown | None |
| Mendon | Mendon City | Not tested | 0 lead · 112 unknown | None |
| Paradise | Paradise Town Water System | Not tested | 0 lead · 191 unknown | 2 |
| Newton | Newton Town Water System | Not tested | 0 lead · 0 unknown | None |
| Clarkston | Clarkston Town Water System | Not tested | 0 lead · 0 unknown | None |
| Trenton | Trenton Town Water System | Not tested | 0 lead · 206 unknown | 2 |
| Amalga | Amalga Town Water System | Not tested | 0 lead · 77 unknown | 1 |
| Cove | Cove Waterworks | Not tested | 0 lead · 25 unknown | 7 |
| Cornish | Cornish Town Water System | Not tested | 0 lead · 60 unknown | 5 |
Neighboring counties
- Rich County252 mg/L
- Weber County195 mg/L
- Morgan County297 mg/L
- Davis County247 mg/L
- Box Elder County360 mg/L
- Summit County196 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.