Water hardness in Salt Lake City, UT

Water in Salt Lake City is very hard, with a median of 363 mg/L (21.2 grains per gallon) across 170 monitoring sites within 10 miles.

42% harder than the Utah median (256 mg/L) 14th hardest of 67 Utah towns Population 209,593
363mg/L
21.2 grains per gallon
Very hard

Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in Salt Lake City can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.

Salt Lake City tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 363 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 21.2 gpg (20.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites170
Lab samples2,597
Sample years2000–2023
Middle 50% of sites269–412 mg/L
Groundwater (wells, springs)365 mg/L · 70 sites
Surface water (rivers, lakes)363 mg/L · 100 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Salt Lake City

Prefilled with Salt Lake City's measured local hardness of 363 mg/L (21.2 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Salt Lake City tap water

Salt Lake City Water System is the main public water system for Salt Lake City. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 52 samples taken Oct 2023 – Oct 2024. 4 PFAS were detected. The highest PFHxS and PFOS results were above EPA's drinking water limit (10 ppt / 4 ppt).

ChemicalHighest resultDetected inEPA limit
PFHxS
perfluorohexane sulfonic acid
18.2 ppt 1 of 52 samples 10 ppt*
PFOS
perfluorooctane sulfonic acid
7.1 ppt 1 of 52 samples 4 ppt
PFPeA
perfluoropentanoic acid
6.2 ppt 1 of 52 samples —
PFHxA
perfluorohexanoic acid
5.7 ppt 1 of 52 samples —

Other water systems serving parts of Salt Lake City

Water systemPFAS detectedHighest PFOA / PFOSTested
Jordan Valley WCD
serves over 10,000 people
None detected — Aug 2023 – May 2025
Granger-Hunter Improvement District
serves over 10,000 people
None detected — Jun 2023 – Mar 2024
Magna Water District
serves over 10,000 people
None detected — Jan 2024 – Oct 2024
Holliday Water Company
serves over 10,000 people
None detected — Aug 2023 – Jul 2024
South Salt Lake City Water System
serves over 10,000 people
PFBA — Mar 2023 – Jan 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Salt Lake City

Salt Lake City Water System reported 86,123 service lines (the pipes connecting homes to the water main) in its inventory. 120 are lead and 102 are galvanized lines that must be replaced, and 31,866 are still of unknown material.

120lead (<1%)
102galvanized requiring replacement
31,866unknown material (37%)
54,035not lead (63%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Salt Lake City Water System whether your address is on its list.

Other water systems serving parts of Salt Lake City

Water systemService linesTotal
Jordan Valley WCD0 lead · 0 galvanized · 0 unknown8,578
Granger-Hunter Improvement District0 lead · 0 galvanized · 0 unknown27,283
Magna Water District0 lead · 69 galvanized · 0 unknown8,914
Holliday Water Company0 lead · 0 galvanized · 1,767 unknown4,003
South Salt Lake City Water System0 lead · 0 galvanized · 3,590 unknown3,931

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Salt Lake City drinking water violations

EPA records show 1 health-based violation for Salt Lake City Water System since 2016, all since resolved or closed. The most recent began in Sep 2017. It also had 4 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Contaminant or ruleTypeViolationsMost recentStatus
Groundwater Rule
requirements to protect well water from fecal contamination
Treatment requirement not met 1 Sep 2017 Resolved/closed

Other water systems serving parts of Salt Lake City

Water systemHealth-based violationsMonitoring/reporting
Jordan Valley WCDNone2
Granger-Hunter Improvement DistrictNone2
Magna Water District167
Holliday Water Company23
South Salt Lake City Water System159

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Salt Lake City

SiteTypeDistanceMedianSamplesYears
JORDAN R AT 500 N XING
Utah Department Of Environmental Quality
River/Stream 0.4 mi344 mg/L232007–2012
Equipment Blank-GW Statewide
Utah Department Of Environmental Quality
River/Stream 0.9 mi7 mg/L22001–2002
BEAR-TRIP BLANK
Utah Department Of Environmental Quality
River/Stream 0.9 mi7 mg/L12009
JORDAN R/UT LAKE INTENSIVE CREW 1-TRIP BLANK
Utah Department Of Environmental Quality
River/Stream 0.9 mi15 mg/L32010–2011
UCASE Equipment Blank-Weber River Watershed
Utah Department Of Environmental Quality
River/Stream 0.9 mi7 mg/L12013
Equipment Blank-Colorado Basin Intensive Crew #2
Utah Department Of Environmental Quality
River/Stream 0.9 mi35 mg/L42013

Water hardness in towns near Salt Lake City

TownDistanceMedianClass
North Salt Lake5 mi 362 mg/LVery hard
South Salt Lake5 mi 350 mg/LVery hard
Woods Cross7 mi 207 mg/LVery hard
West Valley City7 mi 176 mg/LHard
Bountiful8 mi 328 mg/LVery hard
Millcreek8 mi 344 mg/LVery hard
Taylorsville8 mi 370 mg/LVery hard
Murray9 mi 356 mg/LVery hard
Kearns metro township10 mi 397 mg/LVery hard
Holladay10 mi 351 mg/LVery hard

Salt Lake County

Salt Lake City is in Salt Lake County, where the median is 369 mg/L (very hard) across 381 sites.

See all of Salt Lake County →

Utah

The statewide median is 256 mg/L (very hard) from 4,077 sites.

Utah hardness map →

Salt Lake City, UT water: common questions

Do I need a water softener in Salt Lake City?

Very likely. Water measured around Salt Lake City is 21.2 gpg (363 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 37,000 grains.Size it for your household →

Who supplies Salt Lake City's drinking water?

The main public water system serving Salt Lake City in EPA records is Salt Lake City Water System. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Salt Lake City?

It depends on what you want to remove. In Salt Lake City, EPA testing found PFHxS, PFOS and PFPeA and 1 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system reports 120 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced; the system had 1 health-based violation since 2016, for the Groundwater Rule; the utility's annual report says what was done about it. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next