Water hardness in Seagoville, TX

Water in Seagoville is hard, with a median of 167 mg/L (9.8 grains per gallon) across 3 monitoring sites within 10 miles.

14% softer than the Texas median (194 mg/L) 133rd hardest of 251 Texas towns Population 19,643
167mg/L
9.8 grains per gallon
Hard

Seagoville tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 167 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 9.8 gpg (9.4 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites3
Lab samples43
Sample years2000–2005
Middle 50% of sites166–169 mg/L
Surface water (rivers, lakes)167 mg/L · 3 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Seagoville

Prefilled with Seagoville's measured local hardness of 167 mg/L (9.8 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Seagoville tap water

City of Seagoville is the main public water system for Seagoville. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Apr 2023 – Jun 2024. 5 PFAS were detected. The highest PFOS result was above EPA's drinking water limit (4 ppt).

ChemicalHighest resultDetected inEPA limit
PFBA
perfluorobutanoic acid
12.1 ppt 4 of 4 samples —
PFPeA
perfluoropentanoic acid
6.3 ppt 4 of 4 samples —
PFHxA
perfluorohexanoic acid
6.1 ppt 4 of 4 samples —
PFBS
perfluorobutane sulfonic acid
5.1 ppt 4 of 4 samples —
PFOS
perfluorooctane sulfonic acid
5.1 ppt 1 of 4 samples 4 ppt

Other water systems serving parts of Seagoville

Water systemPFAS detectedHighest PFOA / PFOSTested
Dallas Water Utility
serves over 10,000 people
PFPeA, PFHxA, PFBA +5 more 6.3 / 5.1 ppt Mar 2023 – Jan 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Seagoville

City of Seagoville reported 5,530 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 5,530 lines are still of unknown material.

0lead (0%)
0galvanized requiring replacement
5,530unknown material (100%)
0not lead (0%)

Other water systems serving parts of Seagoville

Water systemService linesTotal
Dallas Water Utility0 lead · 6 galvanized · 258,104 unknown320,491

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Seagoville drinking water violations

EPA records show 1 health-based violation for City of Seagoville since 2016, all since resolved or closed. The most recent began in Oct 2024. It also had 6 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Contaminant or ruleTypeViolationsMost recentStatus
Lead and Copper Rule Revisions
lead service line inventory and lead rule requirements
Treatment requirement not met 1 Oct 2024 Resolved/closed

Other water systems serving parts of Seagoville

Water systemHealth-based violationsMonitoring/reporting
Dallas Water UtilityNone0

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Seagoville

SiteTypeDistanceMedianSamplesYears
E Fk Trinity Rv nr Crandall, TX
USGS Texas Water Science Center
Stream 3.6 mi167 mg/L62000
E FK TRINITY RIVER AT FM 3039
Texas Commission on Environmental Quality
River/Stream 5.1 mi165 mg/L162004–2005
Trinity Rv nr Wilmer, TX
USGS Texas Water Science Center
Stream 5.1 mi171 mg/L212000–2001

Water hardness in towns near Seagoville

TownDistanceMedianClass
Balch Springs6 mi 164 mg/LHard
Mesquite8 mi 118 mg/LModerately hard
Forney8 mi 118 mg/LModerately hard
Lancaster14 mi 171 mg/LHard
Heath15 mi 118 mg/LModerately hard
Terrell16 mi 166 mg/LHard
Dallas16 mi 138 mg/LHard
Red Oak17 mi 125 mg/LHard
Rowlett18 mi 118 mg/LModerately hard
Garland18 mi 118 mg/LModerately hard

Kaufman County

Seagoville is in Kaufman County, where the median is 166 mg/L (hard) across 4 sites.

See all of Kaufman County →

Texas

The statewide median is 194 mg/L (very hard) from 2,271 sites.

Texas hardness map →

Seagoville, TX water: common questions

Do I need a water softener in Seagoville?

Many homes here use one. Water measured around Seagoville is 9.8 gpg (167 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 17,000 grains.Size it for your household →

Who supplies Seagoville's drinking water?

The main public water system serving Seagoville in EPA records is City of Seagoville. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Seagoville?

It depends on what you want to remove. In Seagoville, EPA testing found PFBA, PFPeA and PFHxA and 2 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system had 1 health-based violation since 2016, for the Lead and Copper Rule Revisions; the utility's annual report says what was done about it. On the other hand, no lead service lines reported. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next