Water hardness in Prosper, TX
Water in Prosper is hard, with a median of 160 mg/L (9.3 grains per gallon) across 3 monitoring sites within 10 miles.
Prosper tap water at a glance
- HardnessHard (160 mg/L, 9.3 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- PFAS6 found; the highest PFOS result was above EPA's 4 ppt limit (a single result is not a violation).Filters that remove PFAS →
- Lead pipesNo lead service lines reported.Details →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 160 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 9.3 gpg (9 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Prosper
Prefilled with Prosper's measured local hardness of 160 mg/L (9.4 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Prosper tap water
Town of Prosper is the main public water system for Prosper. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Jan 2023 – Mar 2024. 6 PFAS were detected. The highest PFOS result was above EPA's drinking water limit (4 ppt).
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFBA perfluorobutanoic acid | 8.4 ppt | 4 of 4 samples | — |
| PFPeA perfluoropentanoic acid | 7.8 ppt | 4 of 4 samples | — |
| PFHxA perfluorohexanoic acid | 7.7 ppt | 4 of 4 samples | — |
| PFBS perfluorobutane sulfonic acid | 5.4 ppt | 4 of 4 samples | — |
| PFHxS perfluorohexane sulfonic acid | 5.2 ppt | 1 of 4 samples | 10 ppt* |
| PFOS perfluorooctane sulfonic acid | 4.7 ppt | 1 of 4 samples | 4 ppt |
Other water systems serving parts of Prosper
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| City of Denton serves over 10,000 people | PFBA, PFHxA, PFPeA +1 more | — | Jan 2023 – Oct 2023 |
| Mustang Sud serves over 10,000 people | PFBA, PFPeA, PFHxA | — | Jan 2025 – Oct 2025 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Prosper
Town of Prosper reported 14,453 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.
Other water systems serving parts of Prosper
| Water system | Service lines | Total |
|---|---|---|
| City of Denton | 44 lead · 1,276 galvanized · 1,763 unknown | 43,474 |
| Mustang Sud | 0 lead · 1 galvanized · 46 unknown | 31,510 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Prosper drinking water violations
EPA records show no health-based violations for Town of Prosper since 2016. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Prosper
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| City of Denton | None | 1 |
| Mustang Sud | None | 6 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Prosper
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| LITTLE ELM CK AT UPPER FM1385 Texas Commission on Environmental Quality | River/Stream | 5.7 mi | 160 mg/L | 27 | 2000–2003 |
| STEWART CR AT 4TH ARMY MEM DR Texas Commission on Environmental Quality | River/Stream | 8.8 mi | 240 mg/L | 12 | 2005–2006 |
| Lewisville Lk nr Little Elm Pk at Little Elm, TX USGS Texas Water Science Center | Lake, Reservoir, Impoundment | 9.8 mi | 108 mg/L | 52 | 2011–2023 |
Water hardness in towns near Prosper
| Town | Distance | Median | Class |
|---|---|---|---|
| Celina | 6 mi | 111 mg/L | Moderately hard |
| Frisco | 6 mi | 118 mg/L | Moderately hard |
| Little Elm | 7 mi | 116 mg/L | Moderately hard |
| McKinney | 9 mi | 111 mg/L | Moderately hard |
| The Colony | 12 mi | 117 mg/L | Moderately hard |
| Allen | 12 mi | 111 mg/L | Moderately hard |
| Fairview | 13 mi | 113 mg/L | Moderately hard |
| Plano | 14 mi | 212 mg/L | Very hard |
| Melissa | 15 mi | 111 mg/L | Moderately hard |
| Lewisville | 16 mi | 128 mg/L | Hard |
Collin County
Prosper is in Collin County, where the median is 111 mg/L (moderately hard) across 7 sites.
See all of Collin County →Prosper, TX water: common questions
Do I need a water softener in Prosper?
Many homes here use one. Water measured around Prosper is 9.3 gpg (160 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 17,000 grains.Size it for your household →
Who supplies Prosper's drinking water?
The main public water system serving Prosper in EPA records is Town of Prosper. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Prosper?
It depends on what you want to remove. In Prosper, EPA testing found PFBA, PFPeA and PFHxA and 3 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 6 PFAS in Prosper's main water system.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.