Water hardness in Glenn Heights, TX

Water in Glenn Heights is hard, with a median of 163 mg/L (9.5 grains per gallon) across 3 monitoring sites within 10 miles.

16% softer than the Texas median (194 mg/L) 142nd hardest of 251 Texas towns Population 18,793
163mg/L
9.5 grains per gallon
Hard

Glenn Heights tap water at a glance

  • HardnessHard (163 mg/L, 9.5 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
  • PFAS4 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
  • Lead pipesNo lead service lines reported.Details →
  • ViolationsNo health-based violations since 2016.EPA record →

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 163 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 9.5 gpg (9.1 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites3
Lab samples55
Sample years2003–2016
Middle 50% of sites86–164 mg/L
Groundwater (wells, springs)10 mg/L · 1 sites
Surface water (rivers, lakes)164 mg/L · 2 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Glenn Heights

Prefilled with Glenn Heights's measured local hardness of 163 mg/L (9.5 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Glenn Heights tap water

City of Glenn Heights is the main public water system for Glenn Heights. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken May 2023 – Feb 2024. 4 PFAS were detected.

ChemicalHighest resultDetected inEPA limit
PFBA
perfluorobutanoic acid
9.8 ppt 4 of 4 samples —
PFPeA
perfluoropentanoic acid
5.8 ppt 2 of 4 samples —
PFHxA
perfluorohexanoic acid
5.3 ppt 2 of 4 samples —
PFBS
perfluorobutane sulfonic acid
4.4 ppt 2 of 4 samples —

Other water systems serving parts of Glenn Heights

Water systemPFAS detectedHighest PFOA / PFOSTested
City of Red Oak
serves over 10,000 people
PFBA, PFPeA, PFHxA +1 more — May 2023 – Apr 2024
Rockett Sud
serves over 10,000 people
PFBA, PFPeA, PFHxA +1 more — May 2024 – Feb 2025
Sardis Lone ELM WSC
serves over 10,000 people
PFBA, PFPeA, PFHxA +1 more — Jul 2024 – Jun 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Glenn Heights

City of Glenn Heights reported 7,087 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.

0lead (0%)
0galvanized requiring replacement
0unknown material (0%)
7,087not lead (100%)

Other water systems serving parts of Glenn Heights

Water systemService linesTotal
City of Red Oak0 lead · 31 galvanized · 0 unknown4,127
Rockett Sud0 lead · 0 galvanized · 4,078 unknown15,340
Sardis Lone ELM WSC0 lead · 0 galvanized · 1 unknown7,170

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Glenn Heights drinking water violations

EPA records show no health-based violations for City of Glenn Heights since 2016. It also had 16 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Glenn Heights

Water systemHealth-based violationsMonitoring/reporting
City of Red OakNone0
Rockett SudNone7
Sardis Lone ELM WSCNone0

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Glenn Heights

SiteTypeDistanceMedianSamplesYears
JK-33-25-902
USGS Texas Water Science Center
Well 4.6 mi10 mg/L12016
JOE POOL LAKE SITE AC
Texas Commission on Environmental Quality
Reservoir 9.5 mi165 mg/L242003–2006
Joe Pool Lk Site AC nr Duncanville, TX
USGS Texas Water Science Center
Lake, Reservoir, Impoundment 9.5 mi163 mg/L302003–2007

Water hardness in towns near Glenn Heights

TownDistanceMedianClass
DeSoto3 mi 160 mg/LHard
Red Oak5 mi 125 mg/LHard
Lancaster6 mi 171 mg/LHard
Cedar Hill6 mi 161 mg/LHard
Duncanville7 mi 160 mg/LHard
Midlothian10 mi 166 mg/LHard
Waxahachie10 mi 216 mg/LVery hard
Grand Prairie13 mi 165 mg/LHard
Mansfield16 mi 163 mg/LHard
Dallas17 mi 138 mg/LHard

Ellis County

Glenn Heights is in Ellis County, where the median is 125 mg/L (hard) across 13 sites.

See all of Ellis County →

Texas

The statewide median is 194 mg/L (very hard) from 2,271 sites.

Texas hardness map →

Glenn Heights, TX water: common questions

Do I need a water softener in Glenn Heights?

Many homes here use one. Water measured around Glenn Heights is 9.5 gpg (163 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 17,000 grains.Size it for your household →

Who supplies Glenn Heights's drinking water?

The main public water system serving Glenn Heights in EPA records is City of Glenn Heights. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Glenn Heights?

It depends on what you want to remove. In Glenn Heights, EPA testing found PFBA, PFPeA and PFHxA and 1 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next