Water hardness in Shelbyville, TN

Water in Shelbyville is very hard, with a median of 191 mg/L (11.2 grains per gallon) across 23 monitoring sites within 10 miles.

95% harder than the Tennessee median (98 mg/L) 21st hardest of 66 Tennessee towns Population 25,132
191mg/L
11.2 grains per gallon
Very hard

Shelbyville tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 191 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 11.2 gpg (10.7 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites23
Lab samples121
Sample years2000–2009
Middle 50% of sites168–205 mg/L
Groundwater (wells, springs)221 mg/L · 5 sites
Surface water (rivers, lakes)187 mg/L · 18 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Shelbyville

Prefilled with Shelbyville's measured local hardness of 191 mg/L (11.2 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Shelbyville tap water

Shelbyville Water System is the main public water system for Shelbyville. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Jun 2023 – Mar 2024. 6 PFAS were detected. The highest PFOA and PFOS results were above EPA's drinking water limit (4 ppt).

ChemicalHighest resultDetected inEPA limit
PFOA
perfluorooctanoic acid
7.9 ppt 4 of 4 samples 4 ppt
PFBS
perfluorobutane sulfonic acid
7.4 ppt 4 of 4 samples —
PFOS
perfluorooctane sulfonic acid
5.9 ppt 3 of 4 samples 4 ppt
PFBA
perfluorobutanoic acid
5.8 ppt 2 of 4 samples —
PFHxA
perfluorohexanoic acid
4.3 ppt 3 of 4 samples —
PFPeA
perfluoropentanoic acid
4 ppt 2 of 4 samples —

Other water systems serving parts of Shelbyville

Water systemPFAS detectedHighest PFOA / PFOSTested
Bedford County Utility District
serves over 10,000 people
PFOA, PFBS, PFOS +2 more 8.2 / 4.8 ppt Aug 2023 – Jun 2024
Tullahoma Utilities Authority
serves over 10,000 people
PFOA, PFBS, PFBA +4 more 9.6 / 4.8 ppt Dec 2024 – Sep 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Shelbyville

Shelbyville Water System reported 10,731 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 7,974 lines are still of unknown material.

0lead (0%)
0galvanized requiring replacement
7,974unknown material (74%)
2,757not lead (26%)

Other water systems serving parts of Shelbyville

Water systemService linesTotal
Bedford County U.D.0 lead · 0 galvanized · 0 unknown8,401
Tullahoma Utilities Authority0 lead · 0 galvanized · 0 unknown11,249

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Shelbyville drinking water violations

EPA records show no health-based violations for Shelbyville Water System since 2016.

Other water systems serving parts of Shelbyville

Water systemHealth-based violationsMonitoring/reporting
Bedford County Utility District135
Tullahoma Utilities AuthorityNone1

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Shelbyville

SiteTypeDistanceMedianSamplesYears
Bd:L-41
USGS Tennessee Water Science Center
Well 2.4 mi322 mg/L12000
HURRICANE CREEK
Tennessee Department of Environment and Conservation
River/Stream 2.8 mi200 mg/L42000
FLAT CREEK
Tennessee Department of Environment and Conservation
River/Stream 3 mi168 mg/L22000
Duck River
Tennessee Department of Environment and Conservation
River/Stream 3.2 mi153 mg/L12000
Sugar Creek
Tennessee Department of Environment and Conservation
River/Stream 3.5 mi175 mg/L202003–2004
Bd:E-09
USGS Tennessee Water Science Center
Well 4.5 mi146 mg/L12000

Water hardness in towns near Shelbyville

TownDistanceMedianClass
Tullahoma16 mi 82 mg/LModerately hard
Lewisburg19 mi 208 mg/LVery hard
Manchester21 mi 81 mg/LModerately hard
Murfreesboro24 mi 205 mg/LVery hard
Spring Hill31 mi 237 mg/LVery hard
Smyrna33 mi 220 mg/LVery hard
Nolensville34 mi 246 mg/LVery hard
Columbia34 mi 214 mg/LVery hard
Franklin36 mi 234 mg/LVery hard
La Vergne36 mi 218 mg/LVery hard

Bedford County

Shelbyville is in Bedford County, where the median is 179 mg/L (hard) across 37 sites.

See all of Bedford County →

Tennessee

The statewide median is 98 mg/L (moderately hard) from 3,359 sites.

Tennessee hardness map →

Shelbyville, TN water: common questions

Do I need a water softener in Shelbyville?

Very likely. Water measured around Shelbyville is 11.2 gpg (191 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 20,000 grains.Size it for your household →

Who supplies Shelbyville's drinking water?

The main public water system serving Shelbyville in EPA records is Shelbyville Water System. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Shelbyville?

It depends on what you want to remove. In Shelbyville, EPA testing found PFOA, PFBS and PFOS and 3 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next