Water hardness in Pawnee County, OK

Water in Pawnee County is very hard, with a median of 243 mg/L (14.2 grains per gallon) across 22 monitoring sites.

about the same as the Oklahoma median (231 mg/L) 42nd hardest of 76 counties
243mg/L
14.2 grains per gallon
Very hard

Pawnee County water at a glance

  • HardnessVery hard (243 mg/L, 14.2 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 243 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 14.2 gpg (13.6 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites22
Lab samples135
Sample years2000–2024
Middle 50% of sites220–262 mg/L
Groundwater (wells, springs)220 mg/L · 8 sites
Surface water (rivers, lakes)244 mg/L · 14 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Pawnee County

Prefilled with Pawnee County's measured local hardness of 243 mg/L (14.2 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Pawnee County on the Oklahoma map

Harper CountyWashita CountyPottawatomie CountyLatimer CountyCimarron CountyNoble CountyCreek CountyDewey CountyGrady CountyAtoka CountyPushmataha CountyBlaine CountyCaddo CountyWoodward CountyMurray CountyGarfield CountyHarmon CountyMayes CountyGrant CountyCarter CountyJohnston CountyCleveland CountyLe Flore CountyPayne CountyAlfalfa CountyMajor CountyWoods CountyCraig CountySeminole CountyJackson CountyMcCurtain CountyNowata CountyComanche CountyLove CountyRogers CountyCuster CountyCanadian CountyBryan CountyEllis CountyAdair CountyOkmulgee CountyBeaver CountyMuskogee CountyOklahoma CountyCotton CountyJefferson CountyChoctaw CountyMarshall CountyPontotoc CountyWashington CountyBeckham CountyHaskell CountyOkfuskee CountyGreer CountyOttawa CountyDelaware CountyStephens CountyLincoln CountyMcClain CountyOsage CountyKay CountyHughes CountyWagoner CountyCherokee CountyRoger Mills CountyTulsa CountyTexas CountyPittsburg CountyGarvin CountyKingfisher CountySequoyah CountyMcIntosh CountyKiowa CountyLogan CountyCoal CountyTillman County

Cities and communities in Pawnee County

PlaceMedian mg/LClassBased on
Cleveland 243 Very hard county median
Pawnee 242 Very hard 19 sites within 10 miles
Westport 524 Very hard 3 sites within 10 miles
Jennings 218 Very hard 6 sites within 10 miles
Ralston 215 Very hard 21 sites within 10 miles
Hallett 238 Very hard 6 sites within 10 miles
Terlton 218 Very hard 6 sites within 10 miles
Lone Chimney 244 Very hard 15 sites within 10 miles
Blackburn 236 Very hard 9 sites within 10 miles
Maramec 242 Very hard 14 sites within 10 miles
Skedee 236 Very hard 21 sites within 10 miles
Oak Grove 524 Very hard 3 sites within 10 miles
Quay (CDP) 297 Very hard 13 sites within 10 miles

Water quality in Pawnee County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Cleveland Cleveland Municipal Authority Not tested 2 lead · 55 unknown 129
Pawnee Pawnee Not tested 7 lead · 68 unknown 27
Jennings Jennings Not tested Not reported 1 (1 open)
Ralston Ralston Not tested 0 lead · 139 unknown None
Hallett Hallett Public Works Authority None detected 0 lead · 62 unknown 1

Neighboring counties

Oklahoma

The statewide median is 231 mg/L (very hard) from 1,773 sites.

Oklahoma hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next