Water hardness in Kay County, OK
Water in Kay County is very hard, with a median of 262 mg/L (15.3 grains per gallon) across 37 monitoring sites.
Kay County water at a glance
- HardnessVery hard (262 mg/L, 15.3 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 262 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 15.3 gpg (14.7 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Kay County
Prefilled with Kay County's measured local hardness of 262 mg/L (15.3 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Kay County on the Oklahoma map
Cities and communities in Kay County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Ponca City | 467 | Very hard | 16 sites within 10 miles |
| Blackwell | 710 | Very hard | 10 sites within 10 miles |
| Tonkawa | 470 | Very hard | 6 sites within 10 miles |
| Newkirk | 262 | Very hard | 15 sites within 10 miles |
| Kaw City | 168 | Hard | 15 sites within 10 miles |
| Braman | 1,236 | Very hard | 3 sites within 10 miles |
| Kildare | 424 | Very hard | 15 sites within 10 miles |
| Nardin (CDP) | 408 | Very hard | 10 sites within 10 miles |
| Peckham (CDP) | 594 | Very hard | 10 sites within 10 miles |
| Tonkawa Tribal Housing (CDP) | 546 | Very hard | 9 sites within 10 miles |
| White Eagle (CDP) | 314 | Very hard | 17 sites within 10 miles |
Water quality in Kay County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Ponca City | Ponca City Mun Water | 4 found (PFOA ND / PFOS 8.1 ppt) | 0 lead · 10,574 unknown | None |
| Blackwell | Blackwell Municipal Authority | None detected | 6 lead · 0 unknown | 25 |
| Tonkawa | Tonkawa | Not tested | 0 lead · 1,255 unknown | 2 |
| Newkirk | Newkirk | Not tested | 0 lead · 367 unknown | None |
| Kaw City | Kaw City Water Authority | Not tested | 0 lead · 26 unknown | None |
| Braman | Braman | Not tested | 0 lead · 0 unknown | 11 |
Neighboring counties
- Noble County340 mg/L
- Grant County364 mg/L
- Pawnee County243 mg/L
- Osage County198 mg/L
- Garfield County362 mg/L
- Payne County276 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.