Water hardness in Moore, OK

Water in Moore is hard, with a median of 157 mg/L (9.2 grains per gallon) across 70 monitoring sites within 10 miles.

32% softer than the Oklahoma median (231 mg/L) 33rd hardest of 45 Oklahoma towns Population 63,470
157mg/L
9.2 grains per gallon
Hard

Moore tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 157 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 9.2 gpg (8.8 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites70
Lab samples724
Sample years2000–2012
Middle 50% of sites36–244 mg/L
Groundwater (wells, springs)95 mg/L · 52 sites
Surface water (rivers, lakes)308 mg/L · 18 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Moore

Prefilled with Moore's measured local hardness of 157 mg/L (9.2 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Moore tap water

The City of Moore water system is the main public water system for Moore. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 48 samples taken Aug 2023 – Jul 2024. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Moore

Water systemPFAS detectedHighest PFOA / PFOSTested
Oklahoma City
serves over 10,000 people
PFPeA — Jan 2024 – Oct 2024
Norman
serves over 10,000 people
PFBA, PFBS — Oct 2023 – Mar 2025
Oklahoma University
serves over 10,000 people
None detected — Aug 2024 – May 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Moore

Moore Public Works Authority reported 24,702 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 11,761 lines are still of unknown material.

0lead (0%)
0galvanized requiring replacement
11,761unknown material (48%)
12,941not lead (52%)

Other water systems serving parts of Moore

Water systemService linesTotal
Oklahoma City173 lead · 6 galvanized · 32,667 unknown254,388
Norman Utilities Authority13 lead · 960 galvanized · 20,887 unknown42,749
Oklahoma University0 lead · 8 galvanized · 0 unknown162

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Moore drinking water violations

EPA records show 7 health-based violations for the City of Moore water system since 2016, all since resolved or closed. The most recent began in Oct 2024. It also had 56 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Contaminant or ruleTypeViolationsMost recentStatus
Arsenic
naturally occurring in some groundwater, or from industry · what it means
highest measured 0.014 MG/L; limit 0.010 mg/L
Contaminant above legal limit 6 Oct 2024 Resolved/closed
Lead and Copper Rule Revisions
lead service line inventory and lead rule requirements
Treatment requirement not met 1 Oct 2024 Resolved/closed

Other water systems serving parts of Moore

Water systemHealth-based violationsMonitoring/reporting
Oklahoma CityNone0
Norman12
Oklahoma UniversityNone11

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Moore

SiteTypeDistanceMedianSamplesYears
MOORE-WELL 24
Oklahoma Dept. of Environmental Quality
Well 0.9 mi33 mg/L32004–2005
10N-03W-24 AAA 1
USGS Oklahoma Water Science Center
Well 0.9 mi38 mg/L32004–2005
10N-03W-26 ADB 1
USGS Oklahoma Water Science Center
Well 1 mi75 mg/L102004–2008
MOORE-WELL 18
Oklahoma Dept. of Environmental Quality
Well 1.1 mi28 mg/L32004–2005
Little River: 17th Street
Oklahoma Conservation Commission (State)
River/Stream 1.2 mi215 mg/L472008–2009
Little River: 17th Street
Oklahoma Conservation Commission (State)
River/Stream 1.2 mi219 mg/L452008–2009

Water hardness in towns near Moore

TownDistanceMedianClass
Del City8 mi 217 mg/LVery hard
Newcastle9 mi 31 mg/LSoft
Norman9 mi 168 mg/LHard
Oklahoma City10 mi 219 mg/LVery hard
Midwest City11 mi 212 mg/LVery hard
Mustang15 mi 261 mg/LVery hard
Bethany16 mi 370 mg/LVery hard
Choctaw16 mi 212 mg/LVery hard
Warr Acres16 mi 363 mg/LVery hard
Yukon21 mi 378 mg/LVery hard

Cleveland County

Moore is in Cleveland County, where the median is 164 mg/L (hard) across 81 sites.

See all of Cleveland County →

Oklahoma

The statewide median is 231 mg/L (very hard) from 1,773 sites.

Oklahoma hardness map →

Moore, OK water: common questions

Do I need a water softener in Moore?

Many homes here use one. Water measured around Moore is 9.2 gpg (157 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 16,000 grains.Size it for your household →

Who supplies Moore's drinking water?

The main public water system serving Moore in EPA records is Moore. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Moore?

It depends on what you want to remove. In Moore, the system had 7 health-based violations since 2016, for Arsenic and the Lead and Copper Rule Revisions; the utility's annual report says what was done about them. On the other hand, no PFAS found in EPA testing and no lead service lines reported. A water softener is not a filter.How to read your water quality report →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next