Water hardness in New Albany, OH

Water in New Albany is very hard, with a median of 286 mg/L (16.7 grains per gallon) across 72 monitoring sites within 10 miles.

about the same as the Ohio median (276 mg/L) 67th hardest of 183 Ohio towns Population 11,335
286mg/L
16.7 grains per gallon
Very hard

New Albany tap water at a glance

  • HardnessVery hard (286 mg/L, 16.7 gpg, local measurements). Water softeners are common at this level.Size a water softener →

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 286 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 16.7 gpg (16 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites72
Lab samples573
Sample years2000–2024
Middle 50% of sites234–345 mg/L
Groundwater (wells, springs)377 mg/L · 10 sites
Surface water (rivers, lakes)271 mg/L · 62 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for New Albany

Prefilled with New Albany's measured local hardness of 286 mg/L (16.7 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in New Albany tap water

New Albany is served by more than one water system. These systems supply ZIP codes in New Albany and were tested for PFAS ("forever chemicals") in EPA's nationwide UCMR 5 study. Check your water bill to see which one is yours.

Water systems serving New Albany

Water systemPFAS detectedHighest PFOA / PFOSTested
Columbus Public Water System
serves over 10,000 people
PFHxA, PFBA, PFPeA +3 more 5.3 / ND ppt Feb 2024 – Nov 2024
Del-Co Water Company, INC.
serves over 10,000 people
PFBA, PFHxA, PFPeA +2 more 4.2 / ND ppt Jul 2023 – Apr 2024
Gahanna City PWS
serves over 10,000 people
None detected — Nov 2024 – Aug 2025
Westerville City PWS
serves over 10,000 people
PFBA — Nov 2024 – Aug 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in New Albany

New Albany is served by more than one water system. Their service line inventories, as reported to EPA:

Water systems serving New Albany

Water systemService linesTotal
Columbus Public Water System25,155 lead · 8,093 galvanized · 65,266 unknown288,462
Del-Co Water Company, INC.9 lead · 19 galvanized · 14,186 unknown56,197
Gahanna City PWS0 lead · 0 galvanized · 2,120 unknown10,970
Westerville City PWS0 lead · 21 galvanized · 567 unknown12,547

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

New Albany drinking water violations

New Albany is served by more than one water system. Health-based violations recorded by EPA since 2016:

Water systems serving New Albany

Water systemHealth-based violationsMonitoring/reporting
Columbus Public Water System10
Del-Co Water Company, INC.None0
Gahanna City PWSNone1
Westerville City PWS10

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to New Albany

SiteTypeDistanceMedianSamplesYears
BLACKLICK CREEK@ DUBLIN-GRANVILLE RD. (OLD ST. RT. 161)
Division of Surface water (Ohio) (State)
River/Stream 0.8 mi226 mg/L102000
BLACKLICK CREEK NE OF NEW ALBANY @ WALNUT ST.
Division of Surface water (Ohio) (State)
River/Stream 1.2 mi364 mg/L122000–2002
MYERS RESIDENCE
Division of Drinking and Ground Water (Ohio)
Well 1.9 mi346 mg/L102000–2004
SUGAR RUN N OF NEW ALBANY @ ST. RT. 605
Division of Surface water (Ohio) (State)
River/Stream 1.9 mi260 mg/L92000
BLACKLICK CREEK SE OF NEW ALBANY @ MORSE RD.
Division of Surface water (Ohio) (State)
River/Stream 2.9 mi267 mg/L132000–2002
LI-49
USGS Ohio Water Science Center
Well 3 mi487 mg/L12012

Water hardness in towns near New Albany

TownDistanceMedianClass
Pataskala6 mi 306 mg/LVery hard
Gahanna7 mi 260 mg/LVery hard
Westerville8 mi 260 mg/LVery hard
Reynoldsburg9 mi 313 mg/LVery hard
Whitehall10 mi 276 mg/LVery hard
Bexley12 mi 276 mg/LVery hard
Worthington13 mi 237 mg/LVery hard
Columbus13 mi 115 mg/LModerately hard
Pickerington14 mi 328 mg/LVery hard
Upper Arlington16 mi 240 mg/LVery hard

Franklin County

New Albany is in Franklin County, where the median is 277 mg/L (very hard) across 175 sites.

See all of Franklin County →

Ohio

The statewide median is 276 mg/L (very hard) from 6,849 sites.

Ohio hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next