Water hardness in Ashland, OH

Water in Ashland is very hard, with a median of 311 mg/L (18.2 grains per gallon) across 19 monitoring sites within 10 miles.

13% harder than the Ohio median (276 mg/L) 45th hardest of 183 Ohio towns Population 18,718
311mg/L
18.2 grains per gallon
Very hard

Ashland tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 311 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 18.2 gpg (17.4 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites19
Lab samples138
Sample years2000–2024
Middle 50% of sites277–340 mg/L
Groundwater (wells, springs)409 mg/L · 2 sites
Surface water (rivers, lakes)306 mg/L · 17 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Ashland

Prefilled with Ashland's measured local hardness of 311 mg/L (18.2 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Ashland tap water

Ashland City is the main public water system for Ashland. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 2 samples taken Jun 2023 – Dec 2023. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Ashland

Water systemPFAS detectedHighest PFOA / PFOSTested
Rural Lorain Co. Water A
serves over 10,000 people
PFBA, PFHxA — Jan 2023 – Aug 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Ashland

Ashland City reported 7,209 service lines (the pipes connecting homes to the water main) in its inventory. 0 are lead and 125 are galvanized lines that must be replaced, and 2,495 are still of unknown material.

0lead (0%)
125galvanized requiring replacement
2,495unknown material (35%)
4,589not lead (64%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Ashland City whether your address is on its list.

Other water systems serving parts of Ashland

Water systemService linesTotal
Rural Lorain Co. Water A0 lead · 0 galvanized · 0 unknown24,908

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Ashland drinking water violations

EPA records show no health-based violations for Ashland City since 2016. It also had 3 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Ashland

Water systemHealth-based violationsMonitoring/reporting
Rural Lorain Co. Water ANone3

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Ashland

SiteTypeDistanceMedianSamplesYears
JAMISON CREEK 0.75 MI E OF ASHLAND @ CR 1302
Division of Surface water (Ohio) (State)
River/Stream 1.8 mi282 mg/L42007
JEROME FORK AT ASHLAND @ US RT 42
Division of Surface water (Ohio) (State)
River/Stream 2 mi326 mg/L82007–2024
Ashland WTP
Division of Drinking and Ground Water (Ohio)
Well 2.1 mi478 mg/L22012–2013
ASHLAND WTP
Division of Drinking and Ground Water (Ohio)
Facility Public Water Supply (PWS) 2.1 mi396 mg/L92000–2004
Ashland WTP
Division of Drinking and Ground Water (Ohio)
Well 2.1 mi339 mg/L22012–2013
JEROME FORK AT ASHLAND @ CR 1302
Division of Surface water (Ohio) (State)
River/Stream 2.4 mi285 mg/L52007

Water hardness in towns near Ashland

TownDistanceMedianClass
Mansfield13 mi 270 mg/LVery hard
Wooster20 mi 247 mg/LVery hard
Galion26 mi 283 mg/LVery hard
Medina30 mi 252 mg/LVery hard
Norwalk30 mi 317 mg/LVery hard
Wadsworth32 mi 248 mg/LVery hard
Mount Vernon34 mi 244 mg/LVery hard
Bucyrus35 mi 315 mg/LVery hard
Elyria37 mi 220 mg/LVery hard
Norton37 mi 249 mg/LVery hard

Ashland County

Ashland is in Ashland County, where the median is 276 mg/L (very hard) across 37 sites.

See all of Ashland County →

Ohio

The statewide median is 276 mg/L (very hard) from 6,849 sites.

Ohio hardness map →

Ashland, OH water: common questions

Do I need a water softener in Ashland?

Very likely. Water measured around Ashland is 18.2 gpg (311 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 32,000 grains.Size it for your household →

Who supplies Ashland's drinking water?

The main public water system serving Ashland in EPA records is Ashland City. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Ashland?

Not for anything in EPA's records: no PFAS found in EPA testing, no lead service lines reported and no health-based violations since 2016. People here who use a filter usually do it for taste, such as chlorine.Chlorine taste in tap water →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next