Water hardness in St. Paul, MN

Water in St. Paul is hard, with a median of 160 mg/L (9.3 grains per gallon) across 82 monitoring sites within 10 miles.

16% softer than the Minnesota median (190 mg/L) 83rd hardest of 102 Minnesota towns Population 303,820
160mg/L
9.3 grains per gallon
Hard

Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in St. Paul can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.

St. Paul tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 160 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 9.3 gpg (9 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites82
Lab samples3,963
Sample years2000–2025
Middle 50% of sites103–221 mg/L
Groundwater (wells, springs)268 mg/L · 8 sites
Surface water (rivers, lakes)149 mg/L · 74 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for St. Paul

Prefilled with St. Paul's measured local hardness of 160 mg/L (9.4 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in St. Paul tap water

Saint Paul Regional Water Services is the main public water system for St. Paul. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Sep 2023 – Sep 2024. 2 PFAS were detected.

ChemicalHighest resultDetected inEPA limit
PFBA
perfluorobutanoic acid
20.2 ppt 4 of 4 samples —
PFPeA
perfluoropentanoic acid
3 ppt 2 of 4 samples —

Other water systems serving parts of St. Paul

Water systemPFAS detectedHighest PFOA / PFOSTested
North Saint Paul
serves over 10,000 people
PFBA, PFOS, PFHxS ND / 4.2 ppt Jan 2023 – Jul 2023
Roseville
serves over 10,000 people
PFBA — Jun 2023 – Mar 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in St. Paul

Saint Paul Regional Water Services reported 95,806 service lines (the pipes connecting homes to the water main) in its inventory. 19,704 are lead and 3 are galvanized lines that must be replaced, and 5,500 are still of unknown material.

19,704lead (21%)
3galvanized requiring replacement
5,500unknown material (6%)
70,599not lead (74%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Saint Paul Regional Water Services whether your address is on its list.

Other water systems serving parts of St. Paul

Water systemService linesTotal
North Saint Paul19 lead · 49 galvanized · 4,283 unknown4,782
Roseville28 lead · 337 galvanized · 983 unknown10,313

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

St. Paul drinking water violations

EPA records show 1 health-based violation for Saint Paul Regional Water Services since 2016, all since resolved or closed. The most recent began in Apr 2022. It also had 10 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Contaminant or ruleTypeViolationsMost recentStatus
Lead and Copper Rule
corrosion control, testing and notification requirements for lead
Treatment requirement not met 1 Apr 2022 Resolved/closed

Other water systems serving parts of St. Paul

Water systemHealth-based violationsMonitoring/reporting
North Saint PaulNone0
RosevilleNone0

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to St. Paul

SiteTypeDistanceMedianSamplesYears
MISSISSIPPI RIVER 2.1 MI NORTH WEST OF WEST ST PAUL, MN (RIVER MILE 841)
Minnesota Pollution Control Agency - Ambient Surface Water (State)
River/Stream Perennial 1.9 mi260 mg/L92016–2023
LOEB
Minnesota Pollution Control Agency - Ambient Surface Water (State)
Lake 2.1 mi128 mg/L642003–2005
PICKEREL
Minnesota Pollution Control Agency - Ambient Surface Water (State)
Lake 2.3 mi200 mg/L82010–2023
COMO
Minnesota Pollution Control Agency - Ambient Surface Water (State)
Lake 2.8 mi53 mg/L1212000–2012
MISSISSIPPI RIVER NORTH OF LILYDALE, MN (RIVER MILE 843)
Minnesota Pollution Control Agency - Ambient Surface Water (State)
River/Stream Perennial 2.9 mi260 mg/L32016
McCARRON
Minnesota Pollution Control Agency - Ambient Surface Water (State)
Lake 3.4 mi170 mg/L2762000–2012

Water hardness in towns near St. Paul

TownDistanceMedianClass
West St. Paul3 mi 190 mg/LVery hard
Mendota Heights5 mi 220 mg/LVery hard
Roseville5 mi 170 mg/LHard
South St. Paul5 mi 217 mg/LVery hard
Little Canada5 mi 145 mg/LHard
Maplewood6 mi 134 mg/LHard
North St. Paul7 mi 133 mg/LHard
Oakdale7 mi 134 mg/LHard
Vadnais Heights8 mi 125 mg/LHard
Minneapolis8 mi 216 mg/LVery hard

Ramsey County

St. Paul is in Ramsey County, where the median is 136 mg/L (hard) across 60 sites.

See all of Ramsey County →

Minnesota

The statewide median is 190 mg/L (very hard) from 2,553 sites.

Minnesota hardness map →

St. Paul, MN water: common questions

Do I need a water softener in St. Paul?

Many homes here use one. Water measured around St. Paul is 9.3 gpg (160 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 17,000 grains.Size it for your household →

Who supplies St. Paul's drinking water?

The main public water system serving St. Paul in EPA records is Saint Paul Regional Water Services. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in St. Paul?

It depends on what you want to remove. In St. Paul, EPA testing found PFBA and PFPeA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system reports 19,704 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced; the system had 1 health-based violation since 2016, for the Lead and Copper Rule; the utility's annual report says what was done about it. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next