Water hardness in Shakopee, MN

Water in Shakopee is very hard, with a median of 333 mg/L (19.5 grains per gallon) across 38 monitoring sites within 10 miles.

75% harder than the Minnesota median (190 mg/L) 13th hardest of 102 Minnesota towns Population 47,158
333mg/L
19.5 grains per gallon
Very hard

Shakopee tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 333 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 19.5 gpg (18.7 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites38
Lab samples228
Sample years2002–2025
Middle 50% of sites217–395 mg/L
Groundwater (wells, springs)360 mg/L · 3 sites
Surface water (rivers, lakes)332 mg/L · 35 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Shakopee

Prefilled with Shakopee's measured local hardness of 333 mg/L (19.5 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Shakopee tap water

The City of Shakopee water system is the main public water system for Shakopee. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 26 samples taken Jan 2025 – Aug 2025. 4 PFAS were detected.

ChemicalHighest resultDetected inEPA limit
PFBA
perfluorobutanoic acid
33.8 ppt 24 of 26 samples —
PFHxA
perfluorohexanoic acid
33.4 ppt 7 of 26 samples —
PFPeA
perfluoropentanoic acid
9.5 ppt 11 of 26 samples —
PFBS
perfluorobutane sulfonic acid
4.7 ppt 4 of 26 samples —

Other water systems serving parts of Shakopee

Water systemPFAS detectedHighest PFOA / PFOSTested
Prior Lake
serves over 10,000 people
None detected — Oct 2024 – Jul 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Shakopee

The City of Shakopee water system reported 12,328 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 2,864 lines are still of unknown material.

0lead (0%)
0galvanized requiring replacement
2,864unknown material (23%)
9,464not lead (77%)

Other water systems serving parts of Shakopee

Water systemService linesTotal
Prior Lake0 lead · 8 galvanized · 434 unknown9,919

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Shakopee drinking water violations

EPA records show no health-based violations for the City of Shakopee water system since 2016. It also had 2 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Shakopee

Water systemHealth-based violationsMonitoring/reporting
Prior LakeNone0

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Shakopee

SiteTypeDistanceMedianSamplesYears
115N22W20BBADAB01 Shakopee 0000626775
USGS Minnesota Water Science Center
Well 1.3 mi369 mg/L12014
UNN STR (PRIOR LK OUTLET CHANNEL) AT FRONTAGE RD (M-213), E OF VALLEY FAIR IN SHAKOPEE, MN
Minnesota Pollution Control Agency - Ambient Surface Water (State)
River/Stream Perennial 2.4 mi163 mg/L12025
MINNESOTA R AT RIVER MI 21, 0.5 MI N OF MN-101 IN SHAKOPEE
Minnesota Pollution Control Agency - Ambient Surface Water (State)
River/Stream 2.5 mi355 mg/L42021
O'DOWD
Minnesota Pollution Control Agency - Ambient Surface Water (State)
Lake 2.7 mi130 mg/L12025
Downstream of CSAH 101 in Shakopee
Minnesota Pollution Control Agency - Ambient Surface Water (State)
River/Stream Perennial 2.9 mi430 mg/L252014–2025
Blue
Minnesota Pollution Control Agency - Ambient Surface Water (State)
Lake 3 mi332 mg/L82024

Water hardness in towns near Shakopee

TownDistanceMedianClass
Prior Lake4 mi 309 mg/LVery hard
Eden Prairie5 mi 331 mg/LVery hard
Savage6 mi 335 mg/LVery hard
Chanhassen7 mi 350 mg/LVery hard
Chaska7 mi 320 mg/LVery hard
Bloomington9 mi 259 mg/LVery hard
Burnsville10 mi 340 mg/LVery hard
Edina10 mi 252 mg/LVery hard
Victoria11 mi 297 mg/LVery hard
Minnetonka11 mi 263 mg/LVery hard

Scott County

Shakopee is in Scott County, where the median is 348 mg/L (very hard) across 30 sites.

See all of Scott County →

Minnesota

The statewide median is 190 mg/L (very hard) from 2,553 sites.

Minnesota hardness map →

Shakopee, MN water: common questions

Do I need a water softener in Shakopee?

Very likely. Water measured around Shakopee is 19.5 gpg (333 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 34,000 grains.Size it for your household →

Who supplies Shakopee's drinking water?

The main public water system serving Shakopee in EPA records is Shakopee. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Shakopee?

It depends on what you want to remove. In Shakopee, EPA testing found PFBA, PFHxA and PFPeA and 1 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next