Water hardness in Mount Pleasant, MI

Water in Mount Pleasant is very hard, with a median of 387 mg/L (22.6 grains per gallon) across 9 monitoring sites within 10 miles.

158% harder than the Michigan median (150 mg/L) 15th hardest of 101 Michigan towns Population 20,859
387mg/L
22.6 grains per gallon
Very hard

Mount Pleasant tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 387 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 22.6 gpg (21.7 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites9
Lab samples9
Sample years2002–2004
Middle 50% of sites310–719 mg/L
Groundwater (wells, springs)412 mg/L · 8 sites
Surface water (rivers, lakes)200 mg/L · 1 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Mount Pleasant

Prefilled with Mount Pleasant's measured local hardness of 387 mg/L (22.6 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Mount Pleasant tap water

City of Mount Pleasant is the main public water system for Mount Pleasant. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Mar 2025 – Dec 2025. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Mount Pleasant

Water systemPFAS detectedHighest PFOA / PFOSTested
Union Township
serves over 10,000 people
PFBS — Jun 2023 – Dec 2023

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Mount Pleasant

The City of Mount Pleasant water system reported 5,540 service lines (the pipes connecting homes to the water main) in its inventory. 1 are lead and 35 are galvanized lines that must be replaced, and 138 are still of unknown material.

1lead (<1%)
35galvanized requiring replacement
138unknown material (2%)
5,366not lead (97%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask the City of Mount Pleasant water system whether your address is on its list.

Other water systems serving parts of Mount Pleasant

Water systemService linesTotal
Union Township0 lead · 0 galvanized · 371 unknown2,010

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Mount Pleasant drinking water violations

EPA records show 1 health-based violation for City of Mount Pleasant since 2016, all since resolved or closed. The most recent began in Sep 2022. It also had 3 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Contaminant or ruleTypeViolationsMost recentStatus
Surface water treatment (filtration/turbidity)
filtration requirements that protect against microbes such as Cryptosporidium
Treatment requirement not met 1 Sep 2022 Resolved/closed

Other water systems serving parts of Mount Pleasant

Water systemHealth-based violationsMonitoring/reporting
Union TownshipNone2

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Mount Pleasant

SiteTypeDistanceMedianSamplesYears
14N 03W 17 CD 01 ISABELLA CO (SC 6)
USGS Michigan Water Science Center
Well 3.9 mi719 mg/L12002
14N 03W 17CD01 ISABELLA CO (SC 23)
USGS Michigan Water Science Center
Well 3.9 mi769 mg/L12004
14N 03W 20 DA 01 ISABELLA CO (SC 1)
USGS Michigan Water Science Center
Well 4.3 mi310 mg/L12002
14N 03W 20 ADD 01 ISABELLA CO (SC 2)
USGS Michigan Water Science Center
Well 4.4 mi367 mg/L12002
14N 03W 09 DA01 ISABELLA CO (SC 22)
USGS Michigan Water Science Center
Well 5.6 mi387 mg/L12003
14N 03W 15 BA 01 ISABELLA CO (SC 3)
USGS Michigan Water Science Center
Well 5.7 mi436 mg/L12002

Water hardness in towns near Mount Pleasant

TownDistanceMedianClass
Midland27 mi 140 mg/LHard
Saginaw43 mi 241 mg/LVery hard
Bay City44 mi 230 mg/LVery hard
Ionia45 mi 275 mg/LVery hard
Cadillac55 mi 54 mg/LSoft
Northview57 mi 160 mg/LHard
Forest Hills57 mi 180 mg/LHard
Comstock Park59 mi 180 mg/LHard
Waverly60 mi 410 mg/LVery hard
East Lansing60 mi 390 mg/LVery hard

Isabella County

Mount Pleasant is in Isabella County, where the median is 310 mg/L (very hard) across 13 sites.

See all of Isabella County →

Michigan

The statewide median is 150 mg/L (hard) from 1,435 sites.

Michigan hardness map →

Mount Pleasant, MI water: common questions

Do I need a water softener in Mount Pleasant?

Very likely. Water measured around Mount Pleasant is 22.6 gpg (387 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 39,000 grains.Size it for your household →

Who supplies Mount Pleasant's drinking water?

The main public water system serving Mount Pleasant in EPA records is City of Mount Pleasant. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Mount Pleasant?

It depends on what you want to remove. In Mount Pleasant, the system reports 1 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced; the system had 1 health-based violation since 2016, for the Interim Enhanced Surface Water Treatment Rule; the utility's annual report says what was done about it. On the other hand, no PFAS found in EPA testing. A water softener is not a filter.Check your own service line →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next